29-Inch Wheel (29ers)

The Arc is back. Conjuring up all the nostalgia, hoots and hollars from yesteryear. It's your instant-feedback steed for any trail. Show it your singletrack, pump track and your bikepack route too. It's got history to live up to and new history to make. And it's already impatient.

The Arc is back. Conjuring up all the nostalgia, hoots and hollers from yesteryear. It's your instant-feedback steed for any trail. Show it your singletrack, pump track and your bikepack route too. It's got history to live up to and new history to make. And it's already impatient.

The rebel yell of the middle child. Fed a steady diet of super-tech climbs. The SB130 was built to crush the biggest terrain. No trail "too" anything. Point it up or down. Enter a last-minute enduro just for the eff of it. We say no one bike can rule all. But the SB130? One bike that rules. The SB130 possesses a distinct, big mountain feel for riders constantly exposed to uncharted terrain. - Long reach—Puts riders in a balanced position perfectly centered on the bike, ready to tackle the unknown. - 150mm fork—Because our 130mm of rear suspension outperforms similarly stroked forks and pairs well with our more forward-biased position. - Front end doesn't wanter climbing and stays composed when pointed downhill—the rider position remains neutral. Low Slung, Long Drop Long stroke dropper post capability throughout the entire size range for greater agility. At home When You're Not The deeper you go, the higher you climb, the later you brake, the more comfortable SB130 becomes. Bottom line, the term "trail bike" gets used pretty liberally at Yeti. Balance, Achieved Refined for the unknown and everything in between the SB130's Switch Infinity provides a more progressive ride without affecting the anti-squat properties. Silence is TURQ Internally routed cable tubes from end to end for silent function and less translation of housing during suspension movement.

The rebel yell of the middle child. Fed a steady diet of super-tech climbs. The SB130 was built to crush the biggest terrain. No trail "too" anything. Point it up or down. Enter a last-minute enduro just for the eff of it. We say no one bike can rule all. But the SB130? One bike that rules.

The rebel yell of the middle child. Fed a steady diet of super-tech climbs. The SB130 was built to crush the biggest terrain. No trail "too" anything. Point it up or down. Enter a last-minute enduro just for the eff of it. We say no one bike can rule all. But the SB130? One bike that rules.

The rebel yell of the middle child. Fed a steady diet of super-tech climbs. The SB130 was built to crush the biggest terrain. No trail "too" anything. Point it up or down. Enter a last-minute enduro just for the eff of it. We say no one bike can rule all. But the SB130? One bike that rules.

Meet the bike in between nothing. Leaving no rider wanting. Master of the climb, the bomb, the rail and the air. The utterly unequivocal. The rule crusher. The trend buster. No rig can rule all, but this one can absolutely rule. The mountain bike.

Rangefinder is Salsa's confidence-building trail hardtail. Built for riders who want to start discovering their local trail systems, Rangefinder offers geometry and spec designed for the perfect introduction to mountain biking. Rangefinder opens up singletrack and doubletrack adventures and offers provisions for bikepacking setups so riders can expand their off-road repertoires. Rangefinder is mountain biking for the masses. - 6061-T6 alloy frame - Internally-routed shift, brake and dropper post housing - 149 mm suspension fork and dropper post - 1x drivetrain keeps shifting simple with plenty of gear range - Hydraulic brakes offer confident stopping power - Compatible with 29" or 27.5 plus wheels and tires - Carry what you need with the integrated top tube bag mount, two bottle cage mounts in the frame on M, L, and XL sizes, one accessory mount under the down tube, and rear rack mounts

Rangefinder is Salsa's confidence-building trail hardtail. Built for riders who want to start discovering their local trail systems, Rangefinder offers geometry and spec designed for the perfect introduction to mountain biking. Rangefinder opens up singletrack and doubletrack adventures and offers provisions for bikepacking setups so riders can expand their off-road repertoires. Rangefinder is mountain biking for the masses. - 6061-T6 alloy frame - Internally-routed shift, brake and dropper post housing - 159 mm suspension fork and dropper post - 1x drivetrain keeps shifting simple with plenty of gear range - Hydraulic brakes offer confident stopping power - Compatible with 29" or 27.5 plus wheels and tires - Carry what you need with the integrated top tube bag mount, two bottle cage mounts in the frame on M, L, and XL sizes, one accessory mount under the down tube, and rear rack mounts

Rangefinder is Salsa's confidence-building trail hardtail. Built for riders who want to start discovering their local trail systems, Rangefinder offers geometry and spec designed for the perfect introduction to mountain biking. Rangefinder opens up singletrack and doubletrack adventures and offers provisions for bikepacking setups so riders can expand their off-road repertoires. Rangefinder is mountain biking for the masses. - 6061-T6 alloy frame - Internally-routed shift, brake and dropper post housing - 139 mm suspension fork and dropper post - 1x drivetrain keeps shifting simple with plenty of gear range - Hydraulic brakes offer confident stopping power - Compatible with 29" or 27.5 plus wheels and tires - Carry what you need with the integrated top tube bag mount, two bottle cage mounts in the frame on M, L, and XL sizes, one accessory mount under the down tube, and rear rack mounts

Rangefinder is Salsa's confidence-building trail hardtail. Built for riders who want to start discovering their local trail systems, Rangefinder offers geometry and spec designed for the perfect introduction to mountain biking. Rangefinder opens up singletrack and doubletrack adventures and offers provisions for bikepacking setups so riders can expand their off-road repertoires. Rangefinder is mountain biking for the masses. - 6061-T6 alloy frame - Internally-routed shift, brake and dropper post housing - 129 mm suspension fork and dropper post - 1x drivetrain keeps shifting simple with plenty of gear range - Hydraulic brakes offer confident stopping power - Compatible with 29" or 27.5 plus wheels and tires - Carry what you need with the integrated top tube bag mount, two bottle cage mounts in the frame on M, L, and XL sizes, one accessory mount under the down tube, and rear rack mounts

Timberjack is Salsa's aggressive trail hardtail. Its progressive trail geometry is stable on descents and technical sections, while the Alternator 2.0 dropouts allow for adjustable chainstay length to dial in ride characteristics. Ample accessory mounts and dual wheel size compatibility add more versatility to the package, making Timberjack a well-rounded ripper that likes to party. - 6061-T6 alloy frame - Aggressive trail geometry - 130 mm fork and dropper post provide capability in technical terrain - Alternator 2.0 dropouts expand drivetrain and setup options - Short chainstays and long front-center provide agility and stability on the trail - Front triangle space is maximized for frame bag use - Internal cable routing - Compatible with 27.5+ or 29" wheels

Timberjack is Salsa's aggressive trail hardtail. Its progressive trail geometry is stable on descents and technical sections, while the Alternator 2.0 dropouts allow for adjustable chainstay length to dial in ride characteristics. Ample accessory mounts and dual wheel size compatibility add more versatility to the package, making Timberjack a well-rounded ripper that likes to party. - 6061-T6 alloy frame - Aggressive trail geometry - 130 mm fork and dropper post provide capability in technical terrain - Alternator 2.0 dropouts expand drivetrain and setup options - Short chainstays and long front-center provide agility and stability on the trail - Front triangle space is maximized for frame bag use - Internal cable routing - Compatible with 27.5+ or 29" wheels

Timberjack is Salsa's aggressive trail hardtail. Its progressive trail geometry is stable on descents and technical sections, while the Alternator 2.0 dropouts allow for adjustable chainstay length to dial in ride characteristics. Ample accessory mounts and dual wheel size compatibility add more versatility to the package, making Timberjack a well-rounded ripper that likes to party. - 6061-T6 alloy frame - Aggressive trail geometry - 130 mm fork and dropper post provide capability in technical terrain - Alternator 2.0 dropouts expand drivetrain and setup options - Short chainstays and long front-center provide agility and stability on the trail - Front triangle space is maximized for frame bag use - Internal cable routing - Compatible with 27.5+ or 29" wheels

We designed Spearfish Deore to excel in endurance rides like the Arizona Trail, but it's playful enough that you'll choose it for your everyday singletrack sessions, too. The durable 6066-T6 aluminum frame holds up to trail hits and long, tough miles. The progressive XC bike geometry makes Spearfish a capable performer on climbs and technical sections while staying composed on descents. The RockShox Deluxe Select+ shock offers 100 mm of rear travel and our Split Pivot suspension design makes the most of it, with supple bump compliance, predictable braking, and superb traction. The 120 mm RockShox Recon Silver RL fork handles trail chatter up front for a smooth, efficient ride. Spearfish has room for two full-size water bottles and features a set of top tube mounts so you can fit more of your ride gear down low on your frame rather than in a sweaty pack on your back. Shimano's Deore 1 x 12 is a blend of smooth performance and reliability that will take you far.

Horsethief is one bike for many trails. From finessing local loops to savoring new destinations, Horsethief has your back. It's capable of pushing through technical terrain, instills confidence while riding aggressively, and pairs well with beautiful vistas and a post-ride beverage. - Wheel Size: 29", 27.5+ - Front Axle: 15mm Thru x 110mm - Brake Type: Disc - Fork Type: Suspension - Frame Material: Aluminum - TT (Effective): 615 - Rear Axle: 12mm Thru x 157mm - Frame Type: Suspension - Aluminum frame and Split Pivot suspension design with 120mm of efficient travel, remaining fully active under braking while supportive throughout its travel, paired with a 140mm suspension fork - A short stem paired with long top tube, combined with a 67-degree head tube angle provides descending confidence, yet balances overall wheelbase length and slow speed maneuverability - Every size fits two full-size bottles in the triangle; Anything Bracket and top tube mounts boost cargo space for pack-free riding bliss - Super Boost 157 x 12mm rear hub spacing combined with a standard width bottom bracket results in a 432mm chainstay length that's 5mm shorter than previous-generations - Rear flip chip adjusts head tube angle and bottom bracket height for terrain, wheel size, and personal preference - Spec'd with a 29 x 2.5" front and 2.4" rear wheel/tire combination, but can accommodate a range of additional sizes of 27.5 x 2.8 - 3.0" and 29 x 2.2 - 2.6"

Salsa Blackthorn Deore brings together performance and adventure. The aluminum frame is stiff enough to keep you on your line and durable enough to toss in a truck bed for shuttling. Our progressive geometry and Split Pivot suspension design offer a well-balanced platform for pedaling, descending, and taking on technical features. A 140 mm RockShox Super Deluxe Select shock and 160 mm RockShox 35 Gold RL fork ensure plenty of travel for gnarly drops, gaps, and other features. On-bike cargo features like a down tube strap, top tube mounts, and a bottle mount let you keep the weight of your ride gear down low on the frame so you're free to move your body without the burden of a pack. With Shimano's robust Deore 1 x 12 drivetrain backing you up, you'll find very few limits out there. Blackthorn Deore is the 29er all-mountain bike for big rides on diverse terrain. KEY FEATURES: SPLIT PIVOT® REAR SUSPENSION SYSTEM: Split Pivot provides a host of impressive suspension characteristics because the system isolates pedaling forces and braking forces from each other, allowing us to tune and optimize the bike for both independently. The concentric rear axle pivot, in conjunction with precise wheel link, brake link, and control link placement, results in: Excellent bump compliance / Incredible pedaling efficiency / Smooth and predictable braking throughout travel / Maximum traction. SPLIT PIVOT + Split Pivot + is our suspension development philosophy that allows riders to swap suspension travel within a single chassis. PURPOSE-TUNED SUSPENSION The Blackthorn-specific control link and shock links optimize the frame geometry and kinematics for its suspension travel, delivering a well-rounded, balanced trail feel. PROGRESSIVE GEOMETRY Blackthorn is long, low, and slack, with a dash of moderation to preserve pedaling performance. A 64.6-degree head tube angle and short-offset fork feel confident when descending loose, steep trails or blasting through rock gardens. A steep 76.5-degree seat tube angle and consistent cockpit sizing makes for a comfortable pedaling position, while the moderate bottom bracket height provides stability at speed without sacrificing pedaling performance in technical sections. The long front center provides stability in extreme terrain while the short 432 mm chainstays make for nimble handling in tight situations. FLIP CHIP 2.0 Integrated into the shock link mount, Flip Chip 2.0 allows simple, quick adjustments to bottom bracket height and head tube angle to account for the rider’s personal preference, terrain, or wheel size and tire diameter. EPS CARBON MAIN TRIANGLE WITH CARBON SEATSTAYS AND ALUMINUM CHAINSTAYS EPS construction allows for greater manufacturing control, smooth surfacing, a simplified bottom bracket junction, and an integrated shock mount. Carbon fiber material offers improved stiffness, better vibration damping, excellent toughness and weight savings compared to other materials. 6066-T6 aluminum heat-treated chainstays add durability. TOP TUBE ACCESSORY MOUNTS Top tube mounts accommodate K-Edge Top Tube Mount for bike computers or the Salsa EXP Series Direct Mount Top Tube Bag. DOWN TUBE THREE-PACK MOUNTS Three-Pack mounts on down tube accommodate a large water bottle on the lower pair and a frame-mounted pump bracket on the upper pair. INTEGRATED REPAIR KIT LOCATION Located in front of the rear shock in the front triangle, we provide a dedicated place for a small repair kit, tube, or bag of gummies. No more loading up your pockets or strapping the essentials to random spots on the frame and damaging the frame finish. Carbon frames feature an integrated reinforced slot and frame protection. Aluminum frames feature a machined strap slot. The slot is sized to accommodate most 3/4"- to 1"-wide straps. A Salsa Tube Strap is included with each frame (Salsa Tube Straps are for use with tubes only) ACCOMMODATES A 26 OZ BOTTLE All Blackthorn sizes accept a standard 26 oz water bottle within the front triangle. INTERNAL SLEEVED CABLE ROUTING Internal tubes guide housing through the frame, simplifying setup and maintenance, and creating a clean bike profile. MOLDED FRAME PROTECTION Molded rubber down tube, seat tube, chainstay, and seatstay guards protect your frame from impacts and abrasion. MULLET BUILD COMPATIBILITY Mullet build compatibility lets riders run a 29" wheel in the front and a 27.5" wheel in the back with minimal impacts to geometry. CHAIN GUIDE-COMPATIBLE Blackthorn frames feature ISCG-05 mounts for chain guides (removable on carbon frames). STEALTH DROPPER POST ROUTING Compatible with 30.9mm dropper posts for true trail bike performance.

Horsethief is one bike for many trails. From finessing local loops to savoring new destinations, Horsethief has your back. It's capable of pushing through technical terrain, instills confidence while riding aggressively, and pairs well with beautiful vistas and a post-ride beverage. - Wheel Size: 29", 27.5+ - Front Axle: 15mm Thru x 110mm - Brake Type: Disc - Fork Type: Suspension - Frame Material: Aluminum - TT (Effective): 636 - Rear Axle: 12mm Thru x 157mm - Frame Type: Suspension - Aluminum frame and Split Pivot suspension design with 120mm of efficient travel, remaining fully active under braking while supportive throughout its travel, paired with a 140mm suspension fork - A short stem paired with a long top tube, combined with a 67-degree head tube angle provides descending confidence, yet balances overall wheelbase length and slow speed maneuverability - Every size fits two full-size bottles in the triangle; Anything Bracket and top tube mounts boost cargo space for pack-free riding bliss - Super Boost 157 x 12mm rear hub spacing combined with a standard width bottom bracket results in a 432mm chainstay length that's 5mm shorter than previous-generations - Rear flip chip adjusts head tube angle and bottom bracket height for terrain, wheel size, and personal preference - Spec'd with a 29 x 2.5'' front and 2.4" rear wheel/tire combination, but can accommodate a range of additional sizes of 27.5 x 2.8 - 3.0" and 29 x 2.2 - 2.6''

Spearfish SLX is part racer, part rowdy. A 6066-T6 aluminum frame holds up to trail abuse, frame bag strap wear, long miles, you name it. Our progressive XC geometry makes descending easy and climbing efficient. Rocky, technical trails are no sweat, thanks to the efficient pedaling, predictable braking, and traction of our Split Pivot suspension design. A 100 mm Fox Float DPS Performance shock and the 120 mm RockShox SID RL fork mellow out harsh trails to reduce fatigue on long rides. Spearfish's on-bike cargo features, such as two-bottle capacity and top tube mounts, allow for longer rides between resupply points or just an extra lap before heading back to the car. Add Shimano's SLX 1 x 12 components to the mix, and you have an aluminum XC bike that you can rely on through tough racecourses and mellow loops alike.

Blackthorn SLX is our 29er all-mountain bike that's perfect when you're not sure what trail has in store, but you know it's going to be steep, gnarly, loose, or all of the above. Progressive geometry comes to life in a 6061-T6 aluminum frame that's built to last. The 140mm rear shock and 160mm fork make for a smooth, balanced, controlled ride when the trail is anything but. Our tried-and-true Split Pivot suspension system delivers superb small-bump compliance, remarkable climbing ability, and limitless traction, even during braking. Shimano's SLX drivetrain and four-piston brakes are exactly the copilots you want when navigating hair-raising rock gardens, high-speed descents, and stiff climbs. Blackthorn SLX is the tool of choice for all-mountain adventures.

Cassidy is the natural evolution of our Split Pivot lineup. The aluminum frame is engineered for hard-charging on huge terrain, and its progressive geometry with 165mm of rear travel and a 180mm RockShox ZEB fork takes the edge off of burly rock gardens, daunting drops, and steep and sketchy trails. The Split Pivot suspension system adds pedaling efficiency and offers smooth, consistent braking throughout the travel for maximum traction. Shimano's SLX components round out the package for precise shifting, while four-piston brakes bail you out of any situation. Cassidy SLX is made for pulling off smooth moves when the terrain is anything but.

Blackthorn SLX is all-mountain with a side of adventure. The stiff and durable aluminum frame uses our progressive trail geometry for a ride feel that's equal parts downhill ripper and stable climber. The Split Pivot suspension design builds on those qualities with supple-to-supportive travel linked to a 140 mm RockShox Super Deluxe Select+ shock. Paired with a 160 mm RockShox Yari RC fork, Blackthorn has the chops for those rugged lines you've been eyeing. On-bike cargo features like the integrated down tube strap, top tube mounts, and a bottle mount let you keep the ride essentials on your bike rather than your back. Shimano's SLX componentry means a smooth-shifting 1 x 12 wide-range drivetrain, while the four-piston brakes offer all the stopping power you'll need. Blackthorn is a clever and capable rig that brings a lot to the all-mountain table. KEY FEATURES: SPLIT PIVOT® REAR SUSPENSION SYSTEM: Split Pivot provides a host of impressive suspension characteristics because the system isolates pedaling forces and braking forces from each other, allowing us to tune and optimize the bike for both independently. The concentric rear axle pivot, in conjunction with precise wheel link, brake link, and control link placement, results in: Excellent bump compliance / Incredible pedaling efficiency / Smooth and predictable braking throughout travel / Maximum traction. SPLIT PIVOT + Split Pivot + is our suspension development philosophy that allows riders to swap suspension travel within a single chassis. Purpose-Tuned Suspension The Blackthorn-specific control link and shock links optimize the frame geometry and kinematics for its suspension travel, delivering a well-rounded, balanced trail feel. Progressive Geometry Blackthorn is long, low, and slack, with a dash of moderation to preserve pedaling performance. A 64.6-degree head tube angle and short-offset fork feel confident when descending loose, steep trails or blasting through rock gardens. A steep 76.5-degree seat tube angle and consistent cockpit sizing makes for a comfortable pedaling position, while the moderate bottom bracket height provides stability at speed without sacrificing pedaling performance in technical sections. The long front center provides stability in extreme terrain while the short 432 mm chainstays make for nimble handling in tight situations. Flip Chip 2.0 Integrated into the shock link mount, Flip Chip 2.0 allows simple, quick adjustments to bottom bracket height and head tube angle to account for the rider’s personal preference, terrain, or wheel size and tire diameter. EPS Carbon Main Triangle with Carbon Seatstays and Aluminum Chainstays EPS construction allows for greater manufacturing control, smooth surfacing, a simplified bottom bracket junction, and an integrated shock mount. Carbon fiber material offers improved stiffness, better vibration damping, excellent toughness and weight savings compared to other materials. 6066-T6 aluminum heat-treated chainstays add durability. Top Tube Accessory Mounts Top tube mounts accommodate K-Edge Top Tube Mount for bike computers or the Salsa EXP Series Direct Mount Top Tube Bag. Down Tube Three-Pack Mounts Three-Pack mounts on down tube accommodate a large water bottle on the lower pair and a frame-mounted pump bracket on the upper pair. Integrated Repair Kit Location Located in front of the rear shock in the front triangle, we provide a dedicated place for a small repair kit, tube, or bag of gummies. No more loading up your pockets or strapping the essentials to random spots on the frame and damaging the frame finish. Carbon frames feature an integrated reinforced slot and frame protection. Aluminum frames feature a machined strap slot. The slot is sized to accommodate most 3/4"- to 1"-wide straps. A Salsa Tube Strap is included with each frame (Salsa Tube Straps are for use with tubes only) Accommodates a 26 oz Bottle All Blackthorn sizes accept a standard 26 oz water bottle within the front triangle. Internal Sleeved Cable Routing Internal tubes guide housing through the frame, simplifying setup and maintenance, and creating a clean bike profile. Molded Frame Protection Molded rubber down tube, seat tube, chainstay, and seatstay guards protect your frame from impacts and abrasion. Chain Guide-Compatible Blackthorn frames feature ISCG-05 mounts for chain guides (removable on carbon frames). Stealth Dropper Post Routing Compatible with 30.9mm dropper posts for true trail bike performance. MULLET BUILD COMPATIBILITY Mullet build compatibility lets riders run a 29" wheel in the front and a 27.5" wheel in the back with minimal impacts to geometry.

Cassidy SLX is built for more than just getting downhill the fastest. Sure, the 6061-T6 aluminum frame is up for all the trail punishment you can put it through. And the RockShox Super Deluxe Select+ shock and ZEB R fork have your back with 165 mm rear and 180 mm of suspension travel on tap. Cassidy's geometry and our Split Pivot suspension design ensure your tires stick to the trail, whether you're hurtling downhill or climbing back up for another lap. Unlike other enduro bikes, Cassidy features on-bike storage, such as a tube strap spot, a top tube mount, and full-size bottle mount. This lets you extend your ride time or just get the sweaty pack off your back. With a Shimano SLX 1 x 12 drivetrain and four-piston brakes, you're equipped for any enduro course or trail day. KEY FEATURES: SPLIT PIVOT® REAR SUSPENSION SYSTEM: Split Pivot provides a host of impressive suspension characteristics because the system isolates pedaling forces and braking forces from each other, allowing us to tune and optimize the bike for both independently. The concentric rear axle pivot, in conjunction with precise wheel link, brake link, and control link placement, results in: Excellent bump compliance / Incredible pedaling efficiency / Smooth and predictable braking throughout travel / Maximum traction. SPLIT PIVOT + Split Pivot + is our suspension development philosophy that allows riders to swap suspension travel within a single chassis. Flip Chip 2.0 Integrated into the shock link mount, Flip Chip 2.0 allows simple, quick adjustments to bottom bracket height and head tube angle to account for the rider’s personal preference, terrain, or wheel size and tire diameter. MULLET BUILD COMPATIBILITY Mullet build compatibility lets riders run a 29" wheel in the front and a 27.5" wheel in the back with minimal impacts to geometry.

Blackthorn C SLX stands out in the carbon all-mountain bike field for its capability and value. The progressive geometry feels planted on descents and steep climbs. A 160 mm Fox Float X Performance fork and 140 mm RockShox Lyrik Select+ RC shock with Split Pivot suspension design grants you the poise to plow through rock gardens, send drops, and hit doubles with confidence. Blackthorn brings you the benefits of pack-free riding, thanks to the integrated down tube strap, top tube mounts, and a bottle mount. Shimano's SLX 1 x 12 drivetrain and four-piston brakes are components you can rely on. We designed Blackthorn C SLX from the dirt up to lead the all-mountain category. KEY FEATURES: SPLIT PIVOT® REAR SUSPENSION SYSTEM: Split Pivot provides a host of impressive suspension characteristics because the system isolates pedaling forces and braking forces from each other, allowing us to tune and optimize the bike for both independently. The concentric rear axle pivot, in conjunction with precise wheel link, brake link, and control link placement, results in: Excellent bump compliance / Incredible pedaling efficiency / Smooth and predictable braking throughout travel / Maximum traction. SPLIT PIVOT + Split Pivot + is our suspension development philosophy that allows riders to swap suspension travel within a single chassis. PURPOSE-TUNED SUSPENSION The Blackthorn-specific control link and shock links optimize the frame geometry and kinematics for its suspension travel, delivering a well-rounded, balanced trail feel. PROGRESSIVE GEOMETRY Blackthorn is long, low, and slack, with a dash of moderation to preserve pedaling performance. A 64.6-degree head tube angle and short-offset fork feel confident when descending loose, steep trails or blasting through rock gardens. A steep 76.5-degree seat tube angle and consistent cockpit sizing makes for a comfortable pedaling position, while the moderate bottom bracket height provides stability at speed without sacrificing pedaling performance in technical sections. The long front center provides stability in extreme terrain while the short 432 mm chainstays make for nimble handling in tight situations. FLIP CHIP 2.0 Integrated into the shock link mount, Flip Chip 2.0 allows simple, quick adjustments to bottom bracket height and head tube angle to account for the rider’s personal preference, terrain, or wheel size and tire diameter. EPS CARBON MAIN TRIANGLE WITH CARBON SEATSTAYS AND ALUMINUM CHAINSTAYS EPS construction allows for greater manufacturing control, smooth surfacing, a simplified bottom bracket junction, and an integrated shock mount. Carbon fiber material offers improved stiffness, better vibration damping, excellent toughness and weight savings compared to other materials. 6066-T6 aluminum heat-treated chainstays add durability. TOP TUBE ACCESSORY MOUNTS Top tube mounts accommodate K-Edge Top Tube Mount for bike computers or the Salsa EXP Series Direct Mount Top Tube Bag. DOWN TUBE THREE-PACK MOUNTS Three-Pack mounts on down tube accommodate a large water bottle on the lower pair and a frame-mounted pump bracket on the upper pair. INTEGRATED REPAIR KIT LOCATION Located in front of the rear shock in the front triangle, we provide a dedicated place for a small repair kit, tube, or bag of gummies. No more loading up your pockets or strapping the essentials to random spots on the frame and damaging the frame finish. Carbon frames feature an integrated reinforced slot and frame protection. Aluminum frames feature a machined strap slot. The slot is sized to accommodate most 3/4"- to 1"-wide straps. A Salsa Tube Strap is included with each frame (Salsa Tube Straps are for use with tubes only) ACCOMMODATES A 26 OZ BOTTLE All Blackthorn sizes accept a standard 26 oz water bottle within the front triangle. INTERNAL SLEEVED CABLE ROUTING Internal tubes guide housing through the frame, simplifying setup and maintenance, and creating a clean bike profile. MOLDED FRAME PROTECTION Molded rubber down tube, seat tube, chainstay, and seatstay guards protect your frame from impacts and abrasion. MULLET BUILD COMPATIBILITY Mullet build compatibility lets riders run a 29" wheel in the front and a 27.5" wheel in the back with minimal impacts to geometry. CHAIN GUIDE-COMPATIBLE Blackthorn frames feature ISCG-05 mounts for chain guides (removable on carbon frames). STEALTH DROPPER POST ROUTING Compatible with 30.9mm dropper posts for true trail bike performance.

Cassidy C SLX gives you confidence in your lines. The carbon frame tracks straight through rock gardens and over obstacles, supported by RockShox's Super Deluxe Select+ shock and ZEB Select+ RC fork—good for 165 mm rear and 180 mm front travel. The geometry is long, low, and slack enough to tame the steepest descents, but still lets you earn your turns on the climb back up. Our Split Pivot suspension design is compliant and efficient, promising predictable braking and excellent traction. On-bike cargo features include a padded tube strap spot, top tube mount, and full-size bottle clearance for longer rides and less weight in your pack (if you need one at all). The Shimano SLX 1 x 12 groupset is renowned for its reliable performance. Ready to rip? KEY FEATURES: SPLIT PIVOT® REAR SUSPENSION SYSTEM: Split Pivot provides a host of impressive suspension characteristics because the system isolates pedaling forces and braking forces from each other, allowing us to tune and optimize the bike for both independently. The concentric rear axle pivot, in conjunction with precise wheel link, brake link, and control link placement, results in: Excellent bump compliance / Incredible pedaling efficiency / Smooth and predictable braking throughout travel / Maximum traction. SPLIT PIVOT + Split Pivot + is our suspension development philosophy that allows riders to swap suspension travel within a single chassis. Flip Chip 2.0 Integrated into the shock link mount, Flip Chip 2.0 allows simple, quick adjustments to bottom bracket height and head tube angle to account for the rider’s personal preference, terrain, or wheel size and tire diameter. MULLET BUILD COMPATIBILITY Mullet build compatibility lets riders run a 29" wheel in the front and a 27.5" wheel in the back with minimal impacts to geometry.

Spearfish C SLX is a carbon XC 29er that hits a sweet spot between race-day performance and weekday fun. The carbon frame keeps things light and stiff, while the progressive XC geometry makes descending a blast and climbing a breeze. The Fox Float DPS Performance shock brings 100 mm of travel to our Split Pivot suspension design for efficient pedaling, predictable braking, and unshakeable traction. The RockShox SID Select+ fork delivers 120 mm of travel up front to help handle rock gardens and roots. With on-bike cargo features such as two-bottle capacity and top tube mounts, Spearfish keeps all your ride essentials at hand so you can focus on the trail ahead, not fumbling with a pack. Shimano's trusted SLX 1 x 12 drivetrain shifts smoothly through its wide gear range, so you won't be thrown off your rhythm by a bad shift.

Horsethief is one bike for many trails. From finessing local loops to savoring new destinations, Horsethief has your back. It’s capable of pushing through technical terrain, instills confidence while riding aggressively, and pairs well with beautiful vistas and a post-ride beverage. - Wheel Size: 29", 27.5+ - Front Axle: 15mm Thru x 110mm - Brake Type: Disc - Fork Type: Suspension - Frame Material: Carbon - TT (Effective): 593 - Rear Axle: 12mm Thru x 157mm - Frame Type: Suspension - Carbon frame and seat stays featuring the Split Pivot suspension design with 120mm of efficient travel, remaining fully active under braking while supportive throughout its travel, paired with a 140mm suspension fork - A short stem paired with a long top tube, combined with a 67-degree head tube angle provides descending confidence, yet balances overall wheelbase length and slow speed maneuverability - Every size fits two full-size bottles in the triangle; Anything Bracket and top tube mounts boost cargo space for pack-free riding bliss - Super Boost 157 x 12mm rear hub spacing combined with a standard width bottom bracket results in a 432mm chainstay length that’s 5mm shorter than previous-generations - Rear flip chip adjusts head tube angle and bottom bracket height for terrain, wheel size, and personal preference - Spec’d with a 29 x 2.5" front and 2.4" rear wheel/tire combination, but can accommodate a range of additional sizes of 27.5 x 2.8 - 3.0" and 29 x 2.2 - 2.6"

For an all-mountain bike with an adventurous side, Blackthorn C XT is the ticket. We designed the stiff carbon fiber frame around progressive geometry that feels planted on descents and climbs. We paired Blackthorn XT's 160 mm Fox Float 36 Performance Elite GRIP2 fork with a 140 mm Fox Float X Performance Elite shock that runs on our Split Pivot suspension platform for excellent small-bump compliance and support. A padded tube strap spot, top tube mount, and bottle mount allow for pack-free riding or extending your range. The Shimano XT 1 x 12 drivetrain and four-piston brakes keep you in control through testing terrain. Blackthorn C XT is a brilliant all-mountain bike equipped for a wide variety of singletrack adventures. KEY FEATURES: SPLIT PIVOT® REAR SUSPENSION SYSTEM: Split Pivot provides a host of impressive suspension characteristics because the system isolates pedaling forces and braking forces from each other, allowing us to tune and optimize the bike for both independently. The concentric rear axle pivot, in conjunction with precise wheel link, brake link, and control link placement, results in: Excellent bump compliance / Incredible pedaling efficiency / Smooth and predictable braking throughout travel / Maximum traction. SPLIT PIVOT + Split Pivot + is our suspension development philosophy that allows riders to swap suspension travel within a single chassis. PURPOSE-TUNED SUSPENSION The Blackthorn-specific control link and shock links optimize the frame geometry and kinematics for its suspension travel, delivering a well-rounded, balanced trail feel. PROGRESSIVE GEOMETRY Blackthorn is long, low, and slack, with a dash of moderation to preserve pedaling performance. A 64.6-degree head tube angle and short-offset fork feel confident when descending loose, steep trails or blasting through rock gardens. A steep 76.5-degree seat tube angle and consistent cockpit sizing makes for a comfortable pedaling position, while the moderate bottom bracket height provides stability at speed without sacrificing pedaling performance in technical sections. The long front center provides stability in extreme terrain while the short 432 mm chainstays make for nimble handling in tight situations. FLIP CHIP 2.0 Integrated into the shock link mount, Flip Chip 2.0 allows simple, quick adjustments to bottom bracket height and head tube angle to account for the rider’s personal preference, terrain, or wheel size and tire diameter. EPS CARBON MAIN TRIANGLE WITH CARBON SEATSTAYS AND ALUMINUM CHAINSTAYS EPS construction allows for greater manufacturing control, smooth surfacing, a simplified bottom bracket junction, and an integrated shock mount. Carbon fiber material offers improved stiffness, better vibration damping, excellent toughness and weight savings compared to other materials. 6066-T6 aluminum heat-treated chainstays add durability. TOP TUBE ACCESSORY MOUNTS Top tube mounts accommodate K-Edge Top Tube Mount for bike computers or the Salsa EXP Series Direct Mount Top Tube Bag. DOWN TUBE THREE-PACK MOUNTS Three-Pack mounts on down tube accommodate a large water bottle on the lower pair and a frame-mounted pump bracket on the upper pair. INTEGRATED REPAIR KIT LOCATION Located in front of the rear shock in the front triangle, we provide a dedicated place for a small repair kit, tube, or bag of gummies. No more loading up your pockets or strapping the essentials to random spots on the frame and damaging the frame finish. Carbon frames feature an integrated reinforced slot and frame protection. Aluminum frames feature a machined strap slot. The slot is sized to accommodate most 3/4"- to 1"-wide straps. A Salsa Tube Strap is included with each frame (Salsa Tube Straps are for use with tubes only) ACCOMMODATES A 26 OZ BOTTLE All Blackthorn sizes accept a standard 26 oz water bottle within the front triangle. INTERNAL SLEEVED CABLE ROUTING Internal tubes guide housing through the frame, simplifying setup and maintenance, and creating a clean bike profile. MOLDED FRAME PROTECTION Molded rubber down tube, seat tube, chainstay, and seatstay guards protect your frame from impacts and abrasion. MULLET BUILD COMPATIBILITY Mullet build compatibility lets riders run a 29" wheel in the front and a 27.5" wheel in the back with minimal impacts to geometry. CHAIN GUIDE-COMPATIBLE Blackthorn frames feature ISCG-05 mounts for chain guides (removable on carbon frames). STEALTH DROPPER POST ROUTING Compatible with 30.9mm dropper posts for true trail bike performance.

Cassidy C XT is a well-balanced carbon enduro bike. The stiff frame helps you hold your line through treacherous terrain, while Fox's Float X2 Performance shock and Float 38 Performance Elite GRIP2 soften the trail with 165 mm rear and 180 mm front travel. Progressive trail geometry and our Split Pivot suspension design keep your tires planted both down and up the mountain. On-bike cargo features such as a padded tube strap spot, top tube mount, and full-size bottle clearance support extra laps or longer days out, making Cassidy ideal for enduro adventures. Shimano's XT 1 x 12 components bring smooth shifting, wide range, and four-piston brakes to take it all to the next level. Time to start adding trails to your "must-ride" list. KEY FEATURES: SPLIT PIVOT® REAR SUSPENSION SYSTEM: Split Pivot provides a host of impressive suspension characteristics because the system isolates pedaling forces and braking forces from each other, allowing us to tune and optimize the bike for both independently. The concentric rear axle pivot, in conjunction with precise wheel link, brake link, and control link placement, results in: Excellent bump compliance / Incredible pedaling efficiency / Smooth and predictable braking throughout travel / Maximum traction. SPLIT PIVOT + Split Pivot + is our suspension development philosophy that allows riders to swap suspension travel within a single chassis. Flip Chip 2.0 Integrated into the shock link mount, Flip Chip 2.0 allows simple, quick adjustments to bottom bracket height and head tube angle to account for the rider’s personal preference, terrain, or wheel size and tire diameter. MULLET BUILD COMPATIBILITY Mullet build compatibility lets riders run a 29" wheel in the front and a 27.5" wheel in the back with minimal impacts to geometry.

Horsethief is one bike for many trails. From finessing local loops to savoring new destinations, Horsethief has your back. It's capable of pushing through technical terrain, instills confidence while riding aggressively, and pairs well with beautiful vistas and a post-ride beverage. - Wheel Size: 29", 27.5+ - Front Axle: 15mm Thru x 110mm - Brake Type: Disc - Fork Type: Suspension - Frame Material: Carbon - TT (Effective): 615 - Rear Axle: 12mm Thru x 157mm - Frame Type: Suspension - Carbon frame and seat stays featuring the Split Pivot suspension design with 120mm of efficient travel, remaining fully active under braking while supportive throughout its travel, paired with a 140mm suspension fork - A short stem paired with a long top tube, combined with a 67-degree head tube angle provides descending confidence, yet balances overall wheelbase length and slow speed maneuverability - Every size fits two full-size bottles in the triangle; Anything Bracket and top tube mounts boost cargo space for pack-free riding bliss - Super Boost 157 x 12mm rear hub spacing combined with a standard width bottom bracket results in a 432mm chainstay length that's 5mm shorter than previous-generations - Rear flip chip adjusts head tube angle and bottom bracket height for terrain, wheel size, and personal preference - Spec'd with a 29 x 2.5" front and 2.4" rear wheel/tire combination, but can accommodate a range of additional sizes of 27.5 x 2.8 - 3.0" and 29 x 2.2 - 2.6"

Evolution of a Classic This latest iteration of the Trail 429 is evidence of our constant quest for peak performance. We’ve broadened its capabilities without sacrificing its legendary sharpness: slackening the head angle just enough, increasing the reach, and introducing a flip-chip to allow fine-tuning of the geometry toward either the rowdy or racy ends of the spectrum. All-Star Suspension Is it possible for a bike to be both razor-sharp and butter-smooth? Yes. The Trail 429 is proof. In order to wring every drop of potential out of 120mm, we’ve reworked the already stellar dw-link suspension to provide a more bottomless feel and allow for a greater range of tunability. The Trail 429 combines rocket ship pedaling performance with a plushness that genuinely feels like more travel than the numbers indicate. Product Details: - Refined geometry exemplifies the pinnacle of modern race-to-trail performance - New, more progressive dw-link® prioritizes pedaling efficiency yet still rewards riders with plush, controlled travel - 120mm rear suspension travel featuring a vertical trunnion mounted high-volume air shock delivers unprecedented comfort and tunability - Flip chip adjustability allows riders to tailor geometry for either spirited all-round handling or a more progressive and rowdy demeanor - Hassle-free, full-length, internal cable routing with Pivot’s easy-to-service and ultra-quiet Pivot Cable Port System - Fits riders between 4’10” and 6’7” with X-Small to X-Large size offerings - Pivot’s full carbon frame features size-specific ride tuning, leading edge carbon fiber materials, and Pivot’s proprietary hollow core molding technology to ensure that every rider from 4’11” to 6’7” has a bike that feels perfect and performs at the optimum level for their size - Pivot Tool Dock system compatible with mounts under the top tube and integrated into the underside of the frame

Unleashing dominance over enduro-inspired descents. OPTIMIZED FOR THE ENTIRE MOUNTAIN We tailored every detail of the Switchblade to deliver a bike ready to conquer the entire mountain. Progressive geometry broadens the performance envelope while retaining the versatility that made the original so good. Always with an eye on confidence-inspiring design, we shortened, straightened, and steepened the Switchblade’s seat tube to allow longer travel dropper posts. UNCOMMON VERSATILITY The Switchblade was already a bike ahead of its time and the new Switchblade pushes the versatility envelope even further. It doesn’t matter if you want to run 29er wheels, 27.5” X 2.8” plus tires, or even a 29”/27.5” combo – the Switchblade can be perfected for all. BEYOND ALL-MOUNTAIN The new Switchblade’s extraordinary versatility and category-bending capability redefine performance across every type of trail. From bike park flow trails to raw backcountry routes, the Switchblade amplifies every rider’s skills and excels on any trail. PRODUCT DETAILS: Get everything you need to know about the Switchblade. - Ultra-Light Hollow Core Carbon Frame. - 142mm of supple-yet-efficient dw-link™ suspension travel featuring a vertically mounted trunnion metric air shock. - Equipped with a 44mm offset 160mm-travel Fox 36 Grip2. - Flip Chip for on-trail geometry customization. - Featuring the easy-to-find UDH rear derailleur hanger for peace of mind when traveling. - Hassle-free full internal routing with Pivot cable port system. - Compatible with both 29, 27.5+”, and 27.5” rear/29” front (mullet) wheel sizes without compromise thanks to the Flip chip’s adjustable geometry feature. - Custom-tuned Fox Live Valve builds to allow for layers of tuning for a plusher-than-plush feel unmatched by any other suspension setup. - Large Water Bottle Clearance on all sizes. - Pivot Tool Dock system compatible with mounts under the top tube and integrated into the underside of the frame.

ARE YOU THIS RIDER? Do your friends ask if you intend to ride the chairlift when you invite them out for a 'few' park laps? Do your top routes frequently involve pushing up and down trails that aren't on any map? Do your favorite rides begin or end with headlamps, an ice chest, and great friends? Does your bike have to do everything well to get you there and back again? If you think you might be this rider, then Occam should be your bike. - Intended Use: Trail To Light Enduro LINKAGE UPDATE Occam uses a new two-part linkage design. Fewer pieces mean fewer interfaces, greater rigidity, and a lower chance of something working loose. Additionally, we have created a space in the axel and filled it with a handy 4 key multi-tool which is held securely in place with magnets. Always have the most-used tools close at hand for quick tweaks. INTERNAL CABLE ROUTING Occam has our latest, fully internal cable routing, using silicon plugs at the frame entry and exit points and clever conduits linking the front and rear triangle so your cables are fully protected. ASYMMETRICAL DESIGN Instead of using a less-efficient "shock tunnel", the Occam offsets the shock to the left side of the frame, allowing the right-side support to be more central and more efficiently deal with the suspension forces acting on the front triangle. This solution enables us to tune the stiffness of this high-stress area without adding unnecessary weight. THE ASYMMETRIC/OFFSET DESIGN OFFERS UNIQUE ADVANTAGES BEYOND STIFFNESS AND LOW WEIGHT. Avoiding an interrupted seat tube gives more space for dropper posts plus improves access to the shock controls. Additionally, the tidy design leaves room for a water bottle with easy left-side access.

ARE YOU THIS RIDER? Do your friends ask if you intend to ride the chairlift when you invite them out for a 'few' park laps? Do your top routes frequently involve pushing up and down trails that aren't on any map? Do your favorite rides begin or end with headlamps, an ice chest, and great friends? Does your bike have to do everything well to get you there and back again? If you think you might be this rider, then Occam should be your bike. - Intended Use: Trail To Light Enduro LINKAGE UPDATE Occam uses a new two-part linkage design. Fewer pieces mean fewer interfaces, greater rigidity, and a lower chance of something working loose. Additionally, we have created a space in the axel and filled it with a handy 4 key multi-tool which is held securely in place with magnets. Always have the most-used tools close at hand for quick tweaks. INTERNAL CABLE ROUTING Occam has our latest, fully internal cable routing, using silicon plugs at the frame entry and exit points and clever conduits linking the front and rear triangle so your cables are fully protected. ASYMMETRICAL DESIGN Instead of using a less-efficient "shock tunnel", the Occam offsets the shock to the left side of the frame, allowing the right-side support to be more central and more efficiently deal with the suspension forces acting on the front triangle. This solution enables us to tune the stiffness of this high-stress area without adding unnecessary weight. THE ASYMMETRIC/OFFSET DESIGN OFFERS UNIQUE ADVANTAGES BEYOND STIFFNESS AND LOW WEIGHT. Avoiding an interrupted seat tube gives more space for dropper posts plus improves access to the shock controls. Additionally, the tidy design leaves room for a water bottle with easy left-side access.

Get on the dirt and ride your way to your first singletrack. Tempt is that friend that opens a whole new world to you. Key performance factors Confidence Inspiring Perfect as your first mountain bike, the ALUXX-Grade Aluminum frame is lightweight, capable and durable. Versatile Tempt’s performance-minded yet comfortable geometry gives it the versatility for both commutes around campus and off-road rides. Liv 3F Design Philosophy Women’s-specific geometry ensures the rider is balanced over the bike for optimal efficiency, comfort and control. Why we love it With a lightweight ALUXX-Grade aluminum frame designed specifically for women, Tempt can guide you along dirt terrain with speed, efficiency and control. A front suspension fork and powerful disc brakes offer added confidence and control. This hardtail has a low standover height to give you confidence maneuvering around dirt trails and is offered in 27.5 or 29-inch wheels for optimum fit and efficiency. Perfect for a functional around-town ride, to try as your first off-road racing bike, or for venturing out onto the trails for the first time, allow Tempt to lead you to new adventures. Wheel size: Sizes X-Small – Small: 27.5-inch Sizes Small – Large: 29-inch

GET ON THE DIRT AND RIDE YOUR WAY TO YOUR FIRST SINGLETRACK. TEMPT IS THAT FRIEND THAT OPENS A WHOLE NEW WORLD TO YOU. KEY PERFORMANCE FACTORS Confidence Inspiring Perfect as your first mountain bike, the ALUXX-Grade Aluminum frame is lightweight, capable and durable. Versatile Tempt’s performance-minded yet comfortable geometry gives it the versatility for both commutes around campus and off-road rides. XC Control A suspension fork offers control, comfort and stability over bumpy terrain. Depending on frame size, the fork comes with 80mm or 100mm of travel. Wheel size: Sizes X-Small – Small: 27.5-inch Sizes Medium – Large: 29-inch

GET ON THE DIRT AND RIDE YOUR WAY TO YOUR FIRST SINGLETRACK. TEMPT IS THAT FRIEND THAT OPENS A WHOLE NEW WORLD TO YOU. KEY PERFORMANCE FACTORS Confidence Inspiring Perfect as your first mountain bike, the ALUXX-Grade Aluminum frame is lightweight, capable and durable. Versatile Tempt’s performance-minded yet comfortable geometry gives it the versatility for both commutes around campus and off-road rides. XC Control A suspension fork offers control, comfort and stability over bumpy terrain. Depending on frame size, the fork comes with 80mm or 100mm of travel.

Get on the dirt and ride your way to your first singletrack. Tempt is that friend that opens a whole new world to you. Key performance factors Confidence Inspiring Perfect as your first mountain bike, the ALUXX-Grade Aluminum frame is lightweight, capable and durable. Versatile Tempt’s performance-minded yet comfortable geometry gives it the versatility for both commutes around campus and off-road rides. Liv 3F Design Philosophy Women’s-specific geometry ensures the rider is balanced over the bike for optimal efficiency, comfort and control. Why we love it With a lightweight ALUXX-Grade aluminum frame designed specifically for women, Tempt can guide you along dirt terrain with speed, efficiency and control. A front suspension fork and powerful disc brakes offer added confidence and control. This hardtail has a low standover height to give you confidence maneuvering around dirt trails and is offered in 27.5 or 29-inch wheels for optimum fit and efficiency. Perfect for a functional around-town ride, to try as your first off-road racing bike, or for venturing out onto the trails for the first time, allow Tempt to lead you to new adventures. Wheel size: Sizes X-Small – Small: 27.5-inch Sizes Small – Large: 29-inch

GET ON THE DIRT AND RIDE YOUR WAY TO YOUR FIRST SINGLETRACK. TEMPT IS THAT FRIEND THAT OPENS A WHOLE NEW WORLD TO YOU. KEY PERFORMANCE FACTORS Confidence Inspiring Perfect as your first mountain bike, the ALUXX-Grade Aluminum frame is lightweight, capable and durable. Versatile Tempt’s performance-minded yet comfortable geometry gives it the versatility for both commutes around campus and off-road rides. XC Control A suspension fork offers control, comfort and stability over bumpy terrain. Depending on frame size, the fork comes with 80mm or 100mm of travel. Wheel size: Sizes X-Small – Small: 27.5-inch Sizes Medium – Large: 29-inch

GET ON THE DIRT AND RIDE YOUR WAY TO YOUR FIRST SINGLETRACK. TEMPT IS THAT FRIEND THAT OPENS A WHOLE NEW WORLD TO YOU. KEY PERFORMANCE FACTORS Confidence Inspiring Perfect as your first mountain bike, the ALUXX-Grade Aluminum frame is lightweight, capable, and durable. Versatile Tempt's performance-minded yet comfortable geometry gives it the versatility for both commutes around campus and off-road rides. XC Control A suspension fork offers control, comfort and stability over bumpy terrain. Depending on frame size, the fork comes with 80mm or 100mm of travel. HIGHLIGHTS ALUXX ALUMINUM This performance level frame material features 6061 alloy with single-butted tubes to produce strong, lightweight framesets for a variety of different bikes and riding styles. FRONT SUSPENSION 80mm (XS) or 100mm (S-L) with hydraulic lockout and preload adjustment. 2.4-INCH TIRE CLEARANCE Enough room to run up to 2.4-inch wide tires, for added traction. LOW STANDOVER HEIGHT For confidence while maneuvering the bike on dirt trails. INTERNAL CABLE ROUTING Derailleur and rear brake cables are routed internally for a weight-saving, clean look with better performance. DROPPER SEATPOST COMPATIBLE 30.9mm seattube diameter and clean internal cable routing allows for easy dropper seatpost upgrade. 1X OR 2X COMPATIBLE Frameset is designed to work with either a single or double chainring crankset. For 2x setups, either a side-swing or down-swing front derailleur can be used. INTEGRATED MOUNTS Mounts on the seatstays and chain-stays make it easy to accessorize with racks, fenders or a rear kickstand. DISC BRAKE EQUIPPED Powerful disc brakes for confidence and control. Wheel size: - Sizes X-Small – Medium: 27.5-inch - Sizes Small – Large: 29-inch

Nothing is off-limits to the Embolden, a trail bike designed to conquer tricky climbs, rowdy descents, and chunky rock gardens with confidence. Wheel size: - Sizes X-Small – Small: 27.5-inch - Sizes Small – Large: 29-inch

FEEL MORE CONNECTED TO THE TRAIL WITH THE ALL-NEW LURRA. BUILT FOR CHARGING UP SINGLETRACK CLIMBS AND DIVING INTO FAST, FLOWY DESCENTS, THIS HARDTAIL TRAIL BIKE IS SIMPLICITY AT ITS BEST. KEY PERFORMANCE FACTORS Optimal Trail Design Lightweight ALUXX SL-Grade Aluminum hardtail frame with a steep seat tube angle optimizes your input when powering up climbs and hammering on the flats, resulting in greater efficiency and speed. And a 66-degree head tube angle offers confidence on steep descents, while the 438mm chainstays keep it feeling stable and playful. Frame sizes are paired up with wheel sizes, providing the ideal fit for you and where you want to ride. Boosted Confidence Take on technical terrain with the 130mm of plush front suspension, high-volume tubeless tires offering extreme traction on roots, rocks and ruts, and a dropper seatpost allowing you to get low and ride with control. Adventure-Ready The Lurra comes equipped with mounts for two water bottle cages and additional mounts on the underside of the top tube allow riders to add a small gear bag for stowing tools. Internal cable routing keeps the important stuff tidy and protected, so you can stay focused on the ride ahead. TECHS & FEATURES: ALUXX ALUMINUM TECHNOLOGY - This Performance level frame material features 6061 alloy with single-butted tubes to produce strong, lightweight framesets for a variety of different bikes and riding styles. FLEXPOINT SUSPENSION TECHNOLOGY - A proven "single-pivot" design that uses the flexing action of the chainstay/seatstay junction to produce a lightweight and durable suspension system with 4.7 inches/120mm of rear travel. OVERDRIVE - Designed to provide precise front-end steering performance, this fork steerer tube technology uses oversized headset bearings (1 1/4" lower and 1 1/8" upper for road, 1 1/2" lower and 1 1/8" upper for mountain) and tapered steerer tube work in conjunction to provide optimal steering stiffness. POWERCORE - A massively oversized bottom-bracket/chainstay area features a fully integrated, 86-millimeter wide bottom-bracket design (92-millimeter wide for off-road bikes). Asymmetric chainstays provide additional stiffness on the driveside and stability on the non-driveside. TUBELESS SYSTEM - Fewer flat tires. Greater traction. Less rolling resistance and a smoother, faster ride. Giant's Tubeless System makes it easier than ever to experience all these benefits. Wheel size: Sizes X-Small – Small: 27.5-inch Sizes Small – Large: 29-inch

Nothing is off-limits to the embolden, a trail bike designed to conquer tricky climbs, rowdy descents, and chunky rock gardens with confidence. Key Performance Factors: - Wheel Options Available in 27.5- and 29-inch wheel size options, select the Embolden that best fits you and where you want to ride. - Trail Ready ALUXX-grade aluminum frame, tubeless wheelset, dropper seatpost, Liv Sylvia trail saddle, and a 1x drivetrain allow you to tackle new technical terrain with confidence. - Custom Tuned Suspension The 120mm of FlexPoint Suspension has been custom-tuned by women, for women to provide optimal performance for the rider and the bike's intended use, resulting in improved traction and control. Wheel size: Sizes X-Small – Small: 27.5-inch Sizes Small – Large: 29-inch

FEEL MORE CONNECTED TO THE TRAIL WITH THE ALL-NEW LURRA. BUILT FOR CHARGING UP SINGLETRACK CLIMBS AND DIVING INTO FAST, FLOWY DESCENTS, THIS HARDTAIL TRAIL BIKE IS SIMPLICITY AT ITS BEST. KEY PERFORMANCE FACTORS Optimal Trail Design Lightweight ALUXX SL-Grade Aluminum hardtail frame with a steep seat tube angle optimizes your input when powering up climbs and hammering on the flats, resulting in greater efficiency and speed. And a 66-degree head tube angle offers confidence on steep descents, while the 438mm chainstays keep it feeling stable and playful. Frame sizes are paired up with wheel sizes, providing the ideal fit for you and where you want to ride. Boosted Confidence Take on technical terrain with the 130mm of plush front suspension, high-volume tubeless tires offering extreme traction on roots, rocks and ruts, and a dropper seatpost allowing you to get low and ride with control. Adventure-Ready The Lurra comes equipped with mounts for two water bottle cages and additional mounts on the underside of the top tube allow riders to add a small gear bag for stowing tools. Internal cable routing keeps the important stuff tidy and protected, so you can stay focused on the ride ahead. TECHS & FEATURES: ALUXX ALUMINUM TECHNOLOGY - This Performance level frame material features 6061 alloy with single-butted tubes to produce strong, lightweight framesets for a variety of different bikes and riding styles. FLEXPOINT SUSPENSION TECHNOLOGY - A proven "single-pivot" design that uses the flexing action of the chainstay/seatstay junction to produce a lightweight and durable suspension system with 4.7 inches/120mm of rear travel. OVERDRIVE - Designed to provide precise front-end steering performance, this fork steerer tube technology uses oversized headset bearings (1 1/4" lower and 1 1/8" upper for road, 1 1/2" lower and 1 1/8" upper for mountain) and tapered steerer tube work in conjunction to provide optimal steering stiffness. POWERCORE - A massively oversized bottom-bracket/chainstay area features a fully integrated, 86-millimeter wide bottom-bracket design (92-millimeter wide for off-road bikes). Asymmetric chainstays provide additional stiffness on the driveside and stability on the non-driveside. TUBELESS SYSTEM - Fewer flat tires. Greater traction. Less rolling resistance and a smoother, faster ride. Giant's Tubeless System makes it easier than ever to experience all these benefits. Wheel size: Sizes X-Small – Small: 27.5-inch Sizes Small – Large: 29-inch

Nothing is off-limits to the Embolden, a trail bike designed to conquer tricky climbs, rowdy descents, and chunky rock gardens with confidence.

Nothing Is Off-Limits To The Embolden, A Trail Bike Designed To Conquer Tricky Climbs, Rowdy Descents, And Chunky Rock Gardens With Confidence. Key Performance Factors: - Custom Frame Design Women's custom-designed geometry paired with 27.5 or 29-inch wheel size gives the rider the best fit and bike handling. - Trail Capability ALUXX-Grade Aluminum frame, tubeless wheelset, dropper seatpost, Liv Sylvia trail saddle, and a 1x drivetrain allow you to tackle new technical terrain with confidence. - Flexpoint Suspension The 120mm of FlexPoint Suspension provides an effective, lightweight, and durable suspension system so you have increased control while riding over rooty and rocky terrain. Techs and Features: - ALUXX Aluminum Technology This Performance level frame material features 6061 alloys with single-butted tubes to produce strong, lightweight framesets for a variety of different bikes and riding styles. - Overdrive Designed to provide precise front-end steering performance, this fork steerer tube technology uses oversized headset bearings (1 1/4” lower and 1 1/8” upper for road, 1 1/2” lower and 1 1/8” upper for mountain) and tapered steerer tube work in conjunction to provide optimal steering stiffness. - Powercore A massively oversized bottom-bracket/chainstay area features a fully integrated, 86-millimeter wide bottom-bracket design (92-millimeter wide for off-road bikes). Asymmetric chainstays provide additional stiffness on the driveside and stability on the non-driveside. -Tubeless System Engineered with proprietary Dynamic Balanced Lacing technology, this tubeless-ready composite WheelSystem delivers superior efficiency, pinpoint control, and comfort. Wheel size: Sizes X-Small – Small: 27.5-inch Sizes Small – Large: 29-inch

Built to cover ground, mow over techy singletrack, and charge down aggressive terrain, the Intrigue 29 prefers the rowdy side of life.

Built to cover ground, mow over techy singletrack, and charge down aggressive terrain, the all new Intrigue 29 prefers the rowdy side of life. Top Performance Trail Maestro Suspension, ALUXX SL-Grade Aluminum, and no-compromise finish. Balanced Agility With a versatile 125/140 mm platform and 29-inch wheels compatible with up to 2.5-inch tires, Intrigue 29 is a dream for both climbing agility and control while descending. Truly Dialed for Women The Intrigue 29 is designed around Liv’s 3F Design Philosophy combined with suspension testing conducted by women for women, and tuned to perfection. Why we love it Intrigue 29 has now arrived for those riders who fancy a fast-rolling, high-performance trail bike that can handle epic climbs and demanding descents. Our ALUXX SL-Grade aluminum frame leads the charge with women’s-specific geometry and shock tuning specifically designed for women by women. With a 29-inch tubeless Boost wheelset, you can afford to run a slightly shorter travel setup without sacrificing trail fun. Intrigue 29 offers a 140 mm suspension fork and 125mm of rear suspension on an ultra-light, torsionally stiff Advanced Forged Composite linkage. Meet all the demands of your terrain with an advanced rear flip chip, allowing you to change the geometry of the bike to be more suitable for climbing or descending, depending on your trail needs.

Built to cover ground, mow over techy singletrack, and charge down aggressive terrain, the Intrigue 29 prefers the rowdy side of life.

Play The Trail. Built to cover ground, mow over techy singletrack, and charge down aggressive terrain, the Intrigue Advanced 29 prefers the rowdy side of life. Key Performance Factors: - Top Performance Trail Advanced-grade composite frame, carbon wheelset, Maestro Suspension, and flip chip adjustable frame geometry equip you with a lightweight, versatile trail bike. - Balanced Agility Obstacle-eating 29-inch wheels offer smooth handling and roll easily over small roots and rocks. - Custom Tuned Suspension The 125 mm of Maestro Suspension has been custom-tuned by women, for women to provide optimal performance for the rider and the bike's intended use, resulting in improved traction and control.

Whether you're looking ahead to park days, backcountry singletrack adventures, or your next enduro race – the all-new Intrigue LT Advanced equips you with the versatility of adjustable frame geometry, the exceptional efficiency of Advanced-grade composite and the ultra-smooth performance of Maestro suspension so you can do what you do best – SHRED! Key Performance Factors: - Performance Long Travel Trail Lightweight Advanced-grade composite frameset with integrated down tube storage features a slacker head tube angle for confidence on technical terrain and a longer reach to keep you centered and in control in the corners. The 150mm of Maestro rear wheel suspension has been custom-tuned by women who shred, for women who shred. And paired with 160mm of front suspension, you've got a bike that is equal parts agile and burly. - Adjustable Frame Geometry All-new flip chip – Maestro 3 offers more adjustability allowing you to easily change the head tube and seat tube angles, bottom bracket height, and rear wheel size* to fine-tune handling for varying trail conditions and your personal riding style. *Sizes M and L only. - Best of Both Wheels Frame sizes XS and S are solely designed for an MX configuration – 29-inch wheel up front and 27.5-inch wheel in the rear. This setup optimizes rear wheel travel and provides a playful and nimble rear end and a fast-rolling, stable front end. Frame sizes M and L come equipped with 29-inch wheels up front and in the rear with the ability to run a 27.5-inch wheel in the rear. This provides two unique riding characteristics – fast and comfortable or quick and nimble – allowing you to customize your setup for how and where you ride. *27.5-inch wheel sold separately for frame sizes M and L. Techs and Features: - Advanced Forged Composite Technology A state-of-the-art, high-pressure molding process is used to produce complex-shaped carbon fiber components that are lighter, stiffer, and stronger than similar aluminum components. - ALUXX SL Aluminum Technology This High-Performance level, state-of-the-art aluminum material is made predominantly from 6011 alloy and delivers best-in-class strength-to-weight ratios. These framesets also feature unique welding technologies for high-performance ride quality. - Maestro Suspension Technology Four strategically positioned pivot points and two linkages all work together to create a single floating pivot for the most active, efficient, and independent suspension system on the trail. - OverDrive Designed to provide precise front-end steering performance, this fork steerer tube technology uses oversized headset bearings (1 1/4" lower and 1 1/8" upper for road, 1 1/2" lower and 1 1/8" upper for mountain) and tapered steerer tube work in conjunction to provide optimal steering stiffness. - Tubeless System Engineered with proprietary Dynamic Balanced Lacing technology, this tubeless-ready composite WheelSystem delivers superior efficiency, pinpoint control, and comfort. Wheel Sizes: X-Small and Small: 29" Front, 27.5" Rear Medium and Large: 29" Front and Rear

BUILT TO COVER GROUND, MOW OVER TECHY SINGLETRACK, AND CHARGE DOWN AGGRESSIVE TERRAIN, THE INTRIGUE ADVANCED PRO 29 PREFERS THE ROWDY SIDE OF LIFE. KEY PERFORMANCE FACTORS Top Performance Trail Advanced-Grade Composite frame, carbon wheelset, Maestro Suspension and flip chip adjustable frame geometry equip you with a lightweight, versatile trail bike. Balanced Agility Obstacle-eating 29-inch wheels offer smooth handling and roll easily over small roots and rocks. Custom Tuned Suspension The 125 mm of Maestro Suspension has been custom tuned by women, for women to provide optimal performance for the rider and the bike's intended use, resulting in improved traction and control.

Attack the course with speed and efficiency on the Pique Advanced Pro 29. The stiff, light, full-suspension XC bike is ready to set PRs and snag podium steps.

Built to cover ground, mow over techy singletrack, and charge down aggressive terrain, the Intrigue Advanced Pro 29 prefers the rowdy side of life.

Attack the course with speed and efficiency on the Pique Advanced Pro 29. The stiff, light, full-suspension XC bike is ready to set PRs and snag podium steps.

Built to cover ground, mow over techy singletrack, and charge down aggressive terrain, the Intrigue Advanced Pro 29 prefers the rowdy side of life.

Conquer The Mountain. Whether you're looking ahead to park days, backcountry singletrack adventures, or your next enduro race - the all-new Intrigue LT Advanced equips you with the versatility of adjustable frame geometry, the exceptional efficiency of advanced-grade composite and the ultra-smooth performance of maestro suspension so you can do what you do best - shred! Key Performance Factors: - Performance Long Travel Trail Lightweight Advanced-grade composite frameset with integrated down tube storage features a slacker head tube angle for confidence on technical terrain and a longer reach to keep you centered and in control in the corners. The 150mm of Maestro rear wheel suspension has been custom-tuned by women who shred, for women who shred. And paired with 160mm of front suspension, you’ve got a bike that is equal parts agile and burly. - Adjustable Frame Geometry All-new flip chip – Maestro 3 offers more adjustability allowing you to easily change the head tube and seat tube angles, bottom bracket height, and rear wheel size* to fine-tune handling for varying trail conditions and your riding style. *Sizes M and L only - Best of Both Wheels Frame sizes XS and S are solely designed for an MX configuration – 29-inch wheel up front and 27.5-inch wheel in the rear. This setup optimizes rear wheel travel and provides a playful and nimble rear end and a fast-rolling, stable front end. Frame sizes M and L come equipped with 29-inch wheels up front and in the rear with the ability to run a 27.5-inch wheel in the rear. This provides two unique riding characteristics – fast and comfortable or quick and nimble – allowing you to customize your setup for how and where you ride. *27.5-inch wheel sold separately for frame sizes M and L. Techs and Features: - Advanced Composite Technology Liv’s High-Performance Grade raw carbon material is used to produce this frameset in our own composite factory. Using state-of-the-art materials and manufacturing techniques, Liv’s Advanced-Grade Composite frames are designed to offer lightweight and stiffness with optimal compliance. - Advanced Forged Composite Technology A state-of-the-art, high-pressure molding process is used to produce complex-shaped carbon fiber components that are lighter, stiffer, and stronger than similar aluminum components. - Maestro Suspension Technology Four strategically positioned pivot points and two linkages all work together to create a single floating pivot for the most active, efficient, and independent suspension system on the trail. - Overdrive Designed to provide precise front-end steering performance, this fork steerer tube technology uses oversized headset bearings (1 1/4” lower and 1 1/8” upper for road, 1 1/2” lower and 1 1/8” upper for mountain) and tapered steerer tube work in conjunction to provide optimal steering stiffness. - Tubeless System Engineered with proprietary Dynamic Balanced Lacing technology, this tubeless-ready composite WheelSystem delivers superior efficiency, pinpoint control, and comfort.

WHETHER YOU'RE LOOKING AHEAD TO PARK DAYS, BACKCOUNTRY SINGLETRACK ADVENTURES, OR YOUR NEXT ENDURO RACE – THE ALL-NEW INTRIGUE LT ADVANCED PRO EQUIPS YOU WITH THE VERSATILITY OF ADJUSTABLE FRAME GEOMETRY, THE EXCEPTIONAL EFFICIENCY OF ADVANCED-GRADE COMPOSITE AND THE ULTRA-SMOOTH PERFORMANCE OF MAESTRO SUSPENSION SO YOU CAN DO WHAT YOU DO BEST – SHRED! KEY PERFORMANCE FACTORS Performance Long Travel Trail Lightweight Advanced-Grade Composite frameset with integrated down tube storage features a slacker head tube angle for confidence on technical terrain and a longer reach to keep you centered and in control in the corners. The 150mm of Maestro rear wheel suspension has been custom-tuned by women who shred, for women who shred. And paired with 160mm of front suspension, you’ve got a bike that is equal parts agile and burly. Adjustable Frame Geometry All-new flip chip – Maestro 3 offers more adjustability allowing you to easily change the head tube and seat tube angles, bottom bracket height and rear wheel size* to fine-tune handling for varying trail conditions and your personal riding style. *Sizes M and L only. Best of Both Wheels Frame sizes XS and S are solely designed for a MX configuration – 29-inch wheel up front and 27.5-inch wheel in the rear. This set up optimizes rear wheel travel, provides a playful and nimble rear end and a fast-rolling, stable front end. Frame sizes M and L come equipped with 29-inch wheels up front and in the rear with the ability to run a 27.5-inch wheel in the rear. This provides two unique riding characteristics – fast and comfortable or quick and nimble – allowing you to customize your set up for how and where you ride. *27.5-inch wheel sold separately for frame sizes M and L. TECHS & FEATURES: ADVANCED COMPOSITE TECHNOLOGY Liv’s High-Performance Grade raw carbon material is used to produce this frameset in our own composite factory. Using state-of-the-art materials and manufacturing techniques, Liv’s Advanced-Grade Composite frames are designed to offer lightweight and stiffness with optimal compliance. MAESTRO SUSPENSION TECHNOLOGY Four strategically positioned pivot points and two linkages all work together to create a single floating pivot for the most active, efficient and independent suspension system on the trail. OVERDRIVE Designed to provide precise front-end steering performance, this fork steerer tube technology uses oversized headset bearings (1 1/4" lower and 1 1/8" upper for road, 1 1/2" lower and 1 1/8" upper for mountain) and tapered steerer tube work in conjunction to provide optimal steering stiffness. TUBELESS SYSTEM Fewer flat tires. Greater traction. Less rolling resistance and a smoother, faster ride. Giant’s Tubeless System makes it easier than ever to experience all these benefits. FLIP CHIP - MAESTRO 3 This all-new technology allows you to quickly adjust the geometry of your bike to better suit riding conditions and rear-wheel size choice. Using two different flip chips – a combination high/low and a dedicated mid-position chip – riders can change the head tube angle, seat tube angle, and bottom bracket height using eccentric hardware located on the upper rocker arm of the rear suspension.

The exceptionally versatile Intrigue X Advanced was designed to expand your trail capabilities, from technical descents to nimble and efficient climbs, and all the exhilarating flowy goodness in between. Extremely customizable with adjustable geometry, frame storage, and wheel options, the Intrigue X Advanced delivers extra performance and fun. Performance Mid Travel Trail Constructed with lightweight Advanced-grade composite for an agile, responsive ride, the frame also boasts integrated down tube storage — a sleek solution for additional space to store your tools and snacks. Paired with 140mm of Maestro rear suspension and 150mm of front suspension, you’ve got the ultimate trail bike that’s efficient on the ups and shreds on the downs. Adjustable Frame Geometry For ultimate adjustability, the Intrigue X Advanced features flip chip – Maestro 3 and the new flip chip – headset allowing you to customize the overall riding geometry to suit the trail, your riding preferences, and rear wheel choice*. Not only can you change the head tube angle, seat tube angle, and bottom bracket height — you can now adjust your headset position to achieve either a short, mid, or long reach. These fine-tuning adjustments optimize your riding position for better handling and stability, wherever your bike takes you. *Rear wheel size change available for M and L only Best of Both Wheels Frame sizes XS and S are solely designed for an MX configuration – 29-inch wheel up front and 27.5-inch wheel in the rear. This set up optimizes rear wheel travel, allows a playful and nimble rear end and a fast rolling, stable front end. Frame sizes M and L come equipped with 29-inch wheels up front and in the rear with the ability to run a 27.5-inch wheel in the rear*. This provides two unique riding characteristics – fast and comfortable or quick and nimble – allowing you to customize your set up for how and where you ride. *27.5-inch wheel sold separately for frame sizes M and L

WHETHER YOU'RE LOOKING AHEAD TO PARK DAYS, BACKCOUNTRY SINGLETRACK ADVENTURES, OR YOUR NEXT ENDURO RACE – THE ALL-NEW INTRIGUE LT ADVANCED PRO EQUIPS YOU WITH THE VERSATILITY OF ADJUSTABLE FRAME GEOMETRY, THE EXCEPTIONAL EFFICIENCY OF ADVANCED-GRADE COMPOSITE AND THE ULTRA-SMOOTH PERFORMANCE OF MAESTRO SUSPENSION SO YOU CAN DO WHAT YOU DO BEST – SHRED! KEY PERFORMANCE FACTORS Performance Long Travel Trail Lightweight Advanced-Grade Composite frameset with integrated down tube storage features a slacker head tube angle for confidence on technical terrain and a longer reach to keep you centered and in control in the corners. The 150mm of Maestro rear wheel suspension has been custom tuned by women who shred, for women who shred. And paired with 160mm of front suspension, you’ve got a bike that is equal parts agile and burly. Adjustable Frame Geometry All-new flip chip – Maestro 3 offers more adjustability allowing you to easily change the head tube and seat tube angles, bottom bracket height and rear wheel size* to fine-tune handling for varying trail conditions and your personal riding style. *Sizes M and L only. Best of Both Wheels Frame sizes XS and S are solely designed for a MX configuration – 29-inch wheel up front and 27.5-inch wheel in the rear. This set up optimizes rear wheel travel, provides a playful and nimble rear end and a fast-rolling, stable front end. Frame sizes M and L come equipped with 29-inch wheels up front and in the rear with the ability to run a 27.5-inch wheel in the rear. This provides two unique riding characteristics – fast and comfortable or quick and nimble – allowing you to customize your set up for how and where you ride. *27.5-inch wheel sold separately for frame sizes M and L. TECHS & FEATURES: ADVANCED COMPOSITE TECHNOLOGY Liv’s High-Performance Grade raw carbon material is used to produce this frameset in our own composite factory. Using state-of-the-art materials and manufacturing techniques, Liv’s Advanced-Grade Composite frames are designed to offer lightweight and stiffness with optimal compliance. MAESTRO SUSPENSION TECHNOLOGY Four strategically positioned pivot points and two linkages all work together to create a single floating pivot for the most active, efficient and independent suspension system on the trail. OVERDRIVE Designed to provide precise front-end steering performance, this fork steerer tube technology uses oversized headset bearings (1 1/4" lower and 1 1/8" upper for road, 1 1/2" lower and 1 1/8" upper for mountain) and tapered steerer tube work in conjunction to provide optimal steering stiffness. TUBELESS SYSTEM Fewer flat tires. Greater traction. Less rolling resistance and a smoother, faster ride. Giant’s Tubeless System makes it easier than ever to experience all these benefits. FLIP CHIP - MAESTRO 3 This all-new technology allows you to quickly adjust the geometry of your bike to better suit riding conditions and rear-wheel size choice. Using two different flip chips – a combination high/low and a dedicated mid-position chip – riders can change the head tube angle, seat tube angle, and bottom bracket height using eccentric hardware located on the upper rocker arm of the rear suspension.