Kurt Kinetic's 12mm Traxle Through-Axle lets you attach your mountain bike to a Kinetic trainer without changing the original skewer. The Kinetic Traxle comes in 3 thread pitches: - T-2101 Coarse: M12 x 1.75mm - T-2102 Medium: M12 x 1.5 - T-2100 Fine: M12 x 1.00mm (Fine XL has the same thread pitch and is a longer version of the fine Traxle)
$39.95 - $59.99
The E-Thru Trainer Axle allows the use of a mountain bike in a Tacx trainer. These axles are only suitable for Tacx classic trainers.
Our Trainer Axle is designed to adapt your thru-axle equipped bike to on-wheel trainers, such as a 1up, Blackburn, Cyclops, Kinetic, Tacx, Wahoo, and many others. Our goal is to fit the thru-axle to your bike perfectly to minimize spacers and extra parts, providing a clean, high-performance axle for your bike. Train, warm up, and be race ready and fit for the season. - When it’s time for your race or time to head outside, simply remove your bike from the trainer, remove the drive side axle end and go. Our axle is suitable for use on or off the trainer, indoors or out. - The axle shaft and axle ends are precision CNC-machined from 7075 aluminum and hard-anodized for rugged durability. - No special tools required. Design allows for installation or wheel removal using your standard 5mm hex wrench. - Designed, built, and quality tested in the USA. Proven around the world. Important: Before you order, make sure your specific trainer will accommodate the width of your modern thru-axle-equipped bike. Measure your trainer at the widest setting and measure the outside width of your bike frame. Our the trainer axle ends will extend past your frame on each side.
- Remote control for CycleOps VirtualTraining to allow the rider to change the ride view, mark intervals, pause and virtually change gears when using with 400 series or Phantom 5 Indoor Cycle. - Compatible with tablet and mobile devices via Bluetooth Smart only (iPad 3 or newer, iPhone 4s or newer.) - Compatible with PC via ANT+ or Bluetooth Smart (Bluetooth Smart connection Windows 8 or ANT+ connection requires ANT+ dongle/antenna.)
Our Trainer Axle is designed to adapt your Surly MDS/Gnot Boost thru-axle-equipped bike to on-wheel trainers, such as a 1up, Blackburn, Cyclops, Kinetic, Tacx, Wahoo, and many others. Our goal is to fit the thru-axle to your bike perfectly to minimize spacers and extra parts, providing a clean, high-performance axle for your bike. Train, warm up, and be race ready and fit for the season. - This axle is for Surly bikes with the MDS/Gnot Boost system. - When it’s time for your race or time to head outside, simply remove your bike from the trainer, remove the drive side axle end and go. Our axle is suitable for use on or off the trainer, indoors or out. - The axle shaft and axle ends are precision CNC-machined from 7075 aluminum, and hard-anodized for rugged durability. - No special tools required. Design allows for wheel installation or removal using your standard 5 mm hex wrench. - Designed, built, and quality tested in the USA. Proven around the world.
Save Your Tires for Race Day Frequent trainer riders often find the tread on their rear wheel will wear down over time. We recommend using our trainer tires on our Saris indoor trainers. They are made of tough material that can stand up to hours and hours and hours of training. Product Features - 700c x 23 – 25 fits most road bikes. - Ultra-quiet and super-durable. - For use with an indoor trainer only.
Wahoo USB ANT+ dongle Kit connects KICKR, KICKR SNAP and other ANT+ enabled devices to a Mac or PC. The 3-foot extension cord extends the USB ANT+ transmitter away from the computer and towards the connected device to avoid signal interference.
Take on any race, club ride, or weekend adventure with confidence. When you add Saris rollers into your training routine, you'll increase your balance, control, and ability to ride a straight line — all of which translate to more efficiency, power, and technique on the road. And, because you have to pedal 100% of the time to balance your bike, you get an amazing workout, no matter your pace. - Improve balance, control, and ability to ride a straight line. - Aluminum roller drums run silently and smoothly. - Precision-lathed 3.25" aluminum roller drums won't distort in heat or sunlight. - Fold flat or stand on end for convenient storage. - Designed for both indoor and outdoor use - 16" wide wheel base fits just about any size of bike and allows plenty of room to move around. - Rubber foot pads ensure that the only thing moving on the rollers are the drums, providing a secure, sturdy ride. - Durable steel-frame construction - Adjustable belt for right and left dismount - Resistance Roller uses zero moving parts to deliver quiet magnetic resistance. - Maximum wheelbase 44.5" (axle to axle) - Minimum wheelbase 37.5" (axle to axle)
- Includes clutch knob and L-bolt - Basic Trainer Clutch Knob is compatible with any Wind, Mag, Mag+, Magneto or Fluid trainer that already uses L-bolt - Magnus Clutch Knob should only be used with Magnus Smart Trainer - Watch our video to learn more
Adjust resistance on Mag trainer without leaving the saddle. - Quick Release mounting system fits most stems. - For use with the Mag bike trainer only
Look, your child is destined for greatness. We won't dispute that. But, why wait until they can walk for them to rock their awesomeness? If they're crawling, they're ready to explore the world. Attach the Strider Rocking Base to a Strider 12 Bike and get them rocking. The rocking base doesn't just familiarize them with a bike, the rocking motion helps develop their balance, spatial awareness, and core strength. No batteries. No annoying sounds. Just pure, rocking fun. - Compatible with the Strider 12 Classic, Sport, and Pro Balance Bikes - When the Strider 12" Bike is attached this product is intended for ages 6 months – 5 years old for Strider Sport and Pro, and ages 6 months – 3 years for Strider Classic.
The Gel Block is an indispensable accessory for perfecting your position on the bike and provides a more natural feel to your training. - Reduces vibrations on the handlebars for more comfortable training - Non-slip Elastogel insert ensures maximum stability and alignment of the front wheel - Suitable for road and MTB
The Saris 20/24-inch Wheel Adapter allows you to use your BMX or recumbent bike with your trainer.
SERIOUS AND PRECISE POWER- Enhanced by automatic calibration, the KICKR stands up the demands of the world's most powerful cyclists by delivering 2,200 watts of resistance that's accurate to within +/- 1%. REALISTIC RIDE FEEL- KICKR’s professional-grade high-inertia 16lb flywheel and AXIS feet combine to provide an ultra realistic ride feel. SMART RESIST- Set your resistance or power threshold through your favorite app for the most efficient workout possible. THE MOST POWERFUL AND REALISTIC INDOOR TRAINER EXPERIENCE. Power and accuracy designed to offer the world’s most demanding cyclists the ultimate indoor riding experience. KICKR AXIS Feet PROFESSIONAL-GRADE CONSTRUCTION - KICKR’s robust steel construction and a wide stance provide the durability and stability needed to endure years of high-intensity training.
The Wahoo RPM speed sensor is the sleek, magnet-less solution for capturing cycling speed data. It easily mounts to your bike's front wheel hub, and the Bluetooth Smart and ANT+ dual band technology allow you to connect to and display data on both smartphones and bike computers. Tracking speed data has never been this easy. - Both ANT+ and Bluetooth Smart capabilities allow for a wireless connection to both smartphones and bike computers. - No tangled wires on your bike to connect the sensor to your device. - The RPM speed installs easily with no magnets required - It only weighs 16.5 grams with the mount included - Provides accurate speed data during your ride - Mounts on most front wheel hub with a secure silicone casing - Two LED lights show the sensor's device connection (blue) and speed detection (red) - No charging required! Operates on a coin cell battery for up to 1 years. - RPM Speed will fit with most bikes and frame sizes
This freehub body enables you to fit a Campagnolo cassette on the NEO Smart and the FLUX Smart. Suitable for 9 through 11 speed Campagnolo cassettes. How to place the Campagnolo Body: 1. Remove the cap with a 5-millimeter Allen key. 2. Replace the Shimano/SRAM body with the Campagnolo body. 3. Place the cap on the Campagnolo body and tighten with a 5-millimeter Allen key.
$69.95 - $79.99
Use these quick releases to put a racing bike with disc brakes or a mountain bike with a quick-release skewer in a Tacx direct drive trainer. Both axles are supplied with an adapter set so you can select the right combination for your bike. These axles are only suitable for the Tacx direct drives.
This height-adjustable front wheel support can simulate both flat terrain and slopes perfectly - Unique design with 5 levels lets you adjust the height of your front wheel to simulate hill climbs up to 6% - Anti-slip rubber feet eliminate handlebar vibrations - Internal design that guarantees maximum wheel stability - Suitable for both road and MTB - You can attach to the trainer frame when not in use for easy transport and storage
Adapts a thru axle hub bike for a Saris bike trainer. - Trainer Thru Axle Adapter For Saris Trainers - Thread pitch: 1.00 & 1.75 What's Included: - Thru axle - Washers - Endcaps with bolts Trainer Compatibility The Saris Trainer Thru Axle Adapter is designed for indoor use on Saris trainers only and should not be ridden outdoors. Compatible with current basic trainers. Not compatible with CycleOps PowerSync trainers. Contact us with trainer compatibility questions. Bike Compatibility Many bike manufacturers do not publish thread pitch or hub spacing online. If you are unclear as to what type of thru axle your bike uses, please contact us.
Whether you want to attend a group ride in Zwift, climb the Dolomites in Rouvy, or simply need a sweat session, the M2 smart trainer can get you there. All you need is your bike, the M2, your favorite virtual training software, and device of choice. This do-it-all, smart bike trainer is capable of replicating any workout thrown its way, up to 1500 watts and a 15% climbing grade. Simply connect to your virtual training application of choice via integrated dual-band ANT+ FE-C and Bluetooth, and let the M2’s electromagnetic response system do the rest. And, thanks to integrated speed, cadence, and power data, you can track and record performance data without extra external sensors. Plus, our innovative clutch knob ensures perfect tire-to roller connection for every single ride. - Noise level is a quiet 69 decibels at 20 mph. - PowerTuned using PowerTap technology for accurate power readings up to +/- 5%. - This trainer is designed to fit common road and mountain bike frames with included steel quick release skewer and has three settings for rear dropout spacing: 120mm, 130mm, and 135mm. - Optional thru-axle adapter available for 142x12mm and 148x12mm. - Integrated dual ANT+ FE-C and Bluetooth standards. - Fast response electromagnetic resistance ensures most responsive resistance and maximum power available. - Robust design is capable of handling up to 1500 watts at 20 mph and can simulate up to a 15% climbing grade. - Headless mode (powered on, not paired to any apps) lets you ride with a progressive resistance curve that matches the Fluid2. - Internally integrated speed, cadence, and power data eliminates the need for extra external sensors. - LED indicator lights communicate connectivity and more. - Internal cooling system moves air through the trainer to keep it cool while active thermal sensors ensure accurate performance data even during the hardest of workouts. - Comes on the Saris foldable Classic frame with spring loaded, bolt-action lever. - Features clutch knob for perfect roller to tire tension each ride. - 2" resistance unit roller allows for 650b, 700c, 26", 27", and 29" - up to a 2.0-inch tire. - Does not fit 650c wheel sizes, nor all 29er tires. - Precision-machined alloy roller reduces tire wear and slippage. - Eccentric leveling feet allow for easy adjustment on uneven surfaces. - Trainer tire recommended - Compatible with a wide variety of devices and virtual training applications, including Rouvy, Zwift, TrainerRoad, and many more. Contact us with questions about compatibility with other software. - Over the air (OTA) firmware updates via Bluetooth devices ensures the M2 is up to date. - Some assembly required - All of our trainers are tested to the combined weight (rider and bike) of 300 lbs. - ANT+ and BlueGiga USB dongles sold separately - Not compatible with CycleOps- or Saris-branded 20/24" wheel adapter
Protects the bicycle from sweat and avoids corrosions or rust. - Prevents an accumulation of sweat on the frame and components that would lead to corrosion or affect the finish - Sits above the top-tube and can be adjusted for different bicycles - Washing-machine friendly
The Saris thru axle adapter is designed for indoor use on Saris- and CycleOps-branded trainers only and should not be ridden outdoors. Compatible with current classic series trainers. Not compatible with the JetFluid Pro, SuperMagneto Pro, PowerBeam Pro, or PowerSync trainers. Contact us with trainer compatibility questions. - This adapter is designed to work with bikes that have a 142x12mm or 148x12mm thru axle with 1.0 or 1.75 thread pitch. - The axle is threaded on both sides to fit Syntace and Maxle/ABP style thru axle systems. - Many bike manufacturers do not publish thread pitch or hub spacing online. If you are unclear as to what type of thru axle your bike uses, please reach out to your local bike shop or the bicycle manufacturer directly. - Adapts a thru axle hub bike for a trainer - Only compatible with current basic trainers - Fits most 142-148mm thru axle bikes with 1.0 or 1.75 thread pitch
Page 1 of 1