Your Search: "orbea rise"

With a classic 25.4mm clamp diameter, the extra-tall 30mm of rise gives way to comfort and added control for an economic option for any classic mountain bike build. - Material: 6061 alloy - Width: 670mm - Rise: 30mm - Backsweep: 9° - Upsweep: 2° - Clamp diameter: 25.4mm - Bar-end compatible: yes - Weight: 399g

SRAM's Butter Grease is a Slickoleum lube recommended for fork bushings, Roam and Rise wheel rear hub pawls and Reverb seat post service. Keep your parts working smoothly!

Rise shook up the lightweight e-MTB world on its launch with its “more bike, less E” philosophy. Simply the most natural feeling ebike on the market, bringing riders closer to the trail and shattering expectations about how an ebike should ride.

Built upon the popular K-Wing ergonomics, this full carbon handlebar is designed for Adventure, Gravel, and Cyclocross. - Aerodynamic integrated Cable Routing (ACR) - Full carbon handlebar is designed for Adventure, Gravel and Cyclocross - Sculpted contact points for the "hoods" and "drops" riding positions for better ergonomics - Flared drops for better control and clearance when descending - Bar Clamp Diameter: 31.8mm - 115mm drop, 76mm reach - 12° outward bend - 10° forward angle - 25mm offset drops - 5mm rise - 205 grams (420mm)

The Atmos 7k aluminum riser bar series feature a 9° backsweep and 760mm width that is trimmable by 30mm at each end for a possible width of 700mm. The bar is available in 3 rise variants: 0mm, 10mm and 20mm. Made from tough 7050 Lightweight aluminum, the bar weighs just 250g at full width. - 760mm wide - Wide to start and trimmable by 30mm each side - Made from tough 7050 lightweight aluminum SPECIFICATIONS - Type: Riser - Application: XC - Clamp Diameter: 31.8mm - Width: 760mm - Backsweep (degrees): 9

Crucial for dialing-in fit, Ritchey 2x bars help get your hands in just the right position for the best ride performance on your mountain bike. - Material: double-butted 6061 alloy - Width: 740mm - Backsweep: 9° - Rise: reversible +/- 5mm flat rise - Clamp diameter: 31.8mm - Bar-end compatible: yes - Weight: 276g

For riders looking for the perfect fit or a little more comfort miles into a gravel ride, the ErgoMax features an anatomical shallow drop mated with 25mm of rise for an unsurpassed ride quality - Bar Clamp Diameter: 31.8mm - Bar Drop: 128mm - Bar Reach: 73mm - Bar Top Style: Round - Accessory Mount Diameter: 31.8 - Drop Bend Style: Compact - Cable Routing: External - Material: Aluminum - Clip-on Compatible: Yes - Flare: 4.6

The 2X bar packs the material technology, strength, and weight you expect from a Ritchey bar with an additional +/-5mm of height adjustment. - Material: triple-butted 7050 alloy - Width: 740mm (with cutting marks*) - Rise: reversible +/- 5mm flat rise - Backsweep: 5° and 9° - Clamp diameter: 31.8mm - Bar-end compatible: yes - Weight: 232g - Cutting must be done by a professional mechanic or Ritchey authorized dealer, though cutting or modifying any Ritchey product will void the warranty.

The new Ritchey Comp Trail 35 mountain bike stem is designed to accommodate modern MTB bars with a 35mm diameter, such as the new Ritchey Comp Trail Rizer 35. Strong, reliable, and ready for all of your shredding needs, the Comp Trail 35 stem is available in four lengths from 35-65mm and is made from 3D Net Forged 6061-T6 alloy. The head of the stem is vertically offset to the center of its body which allows for a 5mm rise or drop when flipped.

COMFORTABLE & LIGHTWEIGHT The all-new Contact SL Riser road handlebar is an ergonomically shaped aluminum bar that provides maximum stability, stiffness and compliance at a low weight. Along with a comfortable shallow drop, the Contact SLR Riser bar also features a 20mm rise to accommodate a wider fit range as well as offer a lower stem stack for a sleeker profile. FEATURES - Giant advanced alloy manufacturing process delivers a stiff but compliant aluminum bar at minimal weight - 20mm rise for additional fit range

Race Face's Chester bar is made of tough 6061 alloy with the perfect width, sweep and rise to be at home on both your DH and hardtail rigs. These bars will last long after your bones, bruises and scrapes heal up and you’re ready to tackle that gap jump that has had your number. Features - Manufactured from cold drawn, seamless 6061 Alloy. - Butted for an optimal strength to weight ratio. - Wider construction & re-designed taper offers - 740mm wide - 9° rearward, 6° upward

On the surface, the Vice stem may look simple, but under that beautiful veneer lies hours of 3D modelling, countless revisions, and tons of real-world ride testing. All of this is done to provide a light, stiff stem that can handle tremendous forces from every conceivable angle. - 3D Forged and Machined 6061 Alloy construction - Torx, A2 Stainless hardware - 0 deg rise

Race Face took their super popular Turbine 35mm stem and turned the volume up to R. Increased strength to handle the harshest aggressive all mountain riding combined with an update to 0-degree size for optimized fit and performance. This stem sets the new standard in weight vs strength. - CNC Aluminum - 0-degree rise for perfect fit on aggressive bike frames - Extensive CNC machining for weight reduction without impacting strength - TopLock faceplate design for easy and secure installation

We threw in a bit of everything for our take on the ultimate gravel handlebar setup. Rise, sweep, and flare make for an ultra-comfortable handlebar that keeps you in control no matter the terrain. Add the Cruise Control Top and Drop Grips and our Really Long Bar Tape to get to next-level comfort and performance. For the rider that wants to go everywhere, the Kitchen Sink Handlebar is the bar that has everything. With widths from 44 cm up to 50 cm, it's clear we believe in wide. But the added stability and control of a wider bar should not come at the cost of comfort. So we've thrown everything into this handlebar: - 20mm RISE means less pressure on the hands and a broad range of fit options. - 7° SWEEP means the bar is positioned where your hands want to be, whether you're on the flats, the hoods or the drops. - 25° FLARE on a compact drop means a stable, aerodynamic drop position that is actually comfortable enough to use. - Optional endurance loop adds an alternative aerodynamic riding position and a perfect spot for gear storage and mounting accessories.

The SL-K Riser Bar is the ultimate mix of light weight and strength for a handlebar that is designed for all types of riding. Its CSI (Carbon Structural Integration) construction marries the best of both worlds of carbon and aluminum. The carbon helps keep the vibration to a minimum, while the aluminum core maintains a majority of the strength. The SL-K handlebar is XC weight-matched with Enduro strength. With a solid 740mm width and 18mm rise, this bar will help with a perfect fit, great control, and peak performance for even the most demanding rider in mind. - UD carbon and AL6066 material - Carbon Structural Integration (CSI) - Textured stem clamp zone - 18mm rise - 9° backsweep, 4° upsweep - UD carbon finish

Ideally suited for early spring, late fall, or temperate winter days, the breathability and thermoregulating qualities of the R Winter Arm Warmers P1 provide total comfort in cool, wet, and windy conditions. The warmers’ textile is upgraded for increased warmth – even in wet conditions – and when the temperatures rise and the road dries, they still pack down to stow in a jersey pocket. For added versatility, the low-volume, second-skin fit layers easily beneath wind and rain shells, adding insulation to stormproof protection.

Ideally suited for early spring, late fall, or temperate winter days, the breathability and thermoregulating qualities of the R Winter Leg Warmers P1 provide total comfort in cool, wet, and windy conditions. The warmers’ textile is upgraded for increased warmth – even in wet conditions – and when the temperatures rise and the road dries, they still pack down to stow in a jersey pocket. For added versatility, the low-volume, second-skin fit layers easily beneath wind and rain shells, adding insulation to stormproof protection.

Rear Wheel Axle for X0 hubs, including the following wheels: Rise 60 (B1), Roam 30, Roam 40, Rail 40, Rise XX, Roam 50, 60 B1 Compatible with part numbers: HU-X0-A1, WH-RAIL-40-A1, WH-RISE-60-B1, WH-RISE-XX-A1, WH-ROAM-30-A1, WH-ROAM-40-A1, WH-ROAM-50-A1, WH-ROAM-50-B1, WH-ROAM-60-B1

TruVativ's super-tough Hussefelt Riserbar is made from triple-butted AL-66 for a long fatigue life and great strength. The wide bar and high rise gives you an upright position for greater control in technical sections and confidence on steep descents.

- Highly weight optimized single crown stem for use with 35mm handlebars - Dial your fit with micro increment size options, tuned to fit any rider size and style - Cockpit setup index lasered onto stem helps with tuning of upsweep and backsweep - Ultra-short stack height and true zero-degree rise - Chamfered bar clamp to reduce stress risers and increase fatigue life in handlebars - Recommended for: ASTM 5, All mountain, enduro, trail, free ride, E-Bike Specs: - Key Technologies: MGR Alloy, chamfered bar clamp, top-cap included - Material: 6-Series Alloy, 3D forged CNC optimized body - Rise (°): 0 - Diameter: 35mm - Stack height: 34mm - Weight: ±131g (35mm) / ±136g (40mm) ±139g (45mm) ±141g (50mm) - Finish: Shotpeen anodized

- Highly weight-optimized single crown stem, ideal for Enduro applications with 31.8mm handlebars - Human Factor Design features micro increment size options, tuned to fit any rider size and style - Human Factor cockpit setup index facilitates tuning of upsweep and backsweep - Ultra-short stack height and true zero-degree rise - Chamfered bar clamp to reduce stress risers and increase fatigue life in handlebars - Forged 2-piece faceplate design reduces overall weight without compromising bar clamp security or stiffness - Shot peen-anodized surface increases strength, durability, and fatigue life Features: - Key Technologies: Human Factor Design, MGR Alloy, Chamfered bar clamp, Custom Top-Cap included - Material: 6-Series Alloy, 3D forged CNC optimized body, 2D forged faceplate - Rise (°): 0 - Diameter: 31.8mm - Stack Height: 34mm - Weight: ±133g (33mm) / ±138g (38mm) ±140g (43mm) ±143g (48mm) - Finish: Shotpeen anodized

- Micro Grain Refined (MGR) alloy - 5mm headset spacer included - 2D forged MGR alloy - CNC weight optimized - Shotpeen anodized - Key technologies: MGR, chamfered bar clamp - Material: 2D Forged MGR Alloy,CNC Weight Optimized - Length (mm) : 35 / 50 - Rise : 0 Degree - Diameter (mm): 31.8 - Stack height (mm): 35 - Weight (g): 150 (35mm) / 180 (50mm) - Finish: Shot peen anodized, laser logos

The only choice for World Champions and Olympians when it comes to wanting the best bar for XC. Ritchey SuperLogic 2x Flat bar offers crucial fit options in one bar when the high level of competition demands it. Using SuperLogic construction and advanced design philosophy, this 2x bar is perfect for those looking to dial in their race rig without sacrificing weight. - Material: lightweight carbon fiber - Width: 680 and 710mm (cutting not recommended) - Rise: reversible +/- 5mm flat rise - Backsweep: 9° - Clamp diameter: 31.8mm - Bar-end compatible: no - Weight: 120g

All Wheels Manufacturing replacement derailleur hangers are produced in our Colorado shop to exacting tolerances. CNC machined 6061 aluminum Black anodized finish Attaches to frame with: (2) M4x8mm Flat Head Screw Fasteners Included Orbea: Hanger #51/X259

- 3D forged 2014 aluminum alloy with oversized box cross-section - Oversize 46mm wide 6061 alloy faceplate - Steel hardware - ± 8° rise requires fewer spacers - 1-1/8" steerer adapter included

SRAM's Rise 60 conversion caps are the ticket for converting your Rise 60 wheels to a different axle type.

Cult Redemption stem, for when you want a topload stem but without so much rise. - Wider and beefier than the OG Salvation stem - Improved clamping area - Recessed compression bolt for a clean look - Bar Clamp Diameter (mm): 22.2 - Steerer Clamp Diameter: 1-1/8" ins

Kalloy's 822 Adjustable Stem lets you set up your handlebars exactly where you want them using just an allen wrench! With a 0-60° rise, you're sure to find a position that puts you comfortably in control. Its 4-bolt handlebar clamp makes bar changes easy and secure. - For quill-style steerers

The Atmos 7k stem is a lightweight performance stem designed for trail and cross-country use and is the lightest stem in the Atmos range. Featuring a rise or drop of 6° depending on your preference, all fasteners are adjustable via a T25 tool for easy, quick adjustments. The Atmos 7k also features an integrated GoPro mount. - ±6° angle - Integrated GoPro mount - T25 fasteners for 1 tool across the cockpit SPECIFICATIONS - Stem Angle/Rise: 6 degrees - Clamp diameter: 31.8mm - Steerer clamp diameter: 1-1/8 in - Hardware: Steel

You say you want a wide, stiff, strong, championship-winning design? Here you go. The new Descendant DH bar borrows from a rich championship-winning heritage, and adapts it to today’s aggressive courses and riders. Descendant DH bars are the command center of cornering control. - Material: Al-7050 - Width: 800mm - Backsweep: 9-degrees - Rise: 25mm - Upsweep: 5-degrees - Colors: Black