29-Inch

EX 1700 SPLINE wheels feature a super strong and welded 30 mm wide aluminum rim with a profile design made to withstand the hardest use of Enduro racing, while still keeping the weight low for long and demanding uphills. Laced to double butted competition straightpull spokes, the EX 1700 SPLINE wheels are built to take a beating. - Welded Aluminum rim with 30mm internal width - 350 hub with 36 point SL Ratchet system - Competition spokes and Squorx nipples - Designed for Enduro applications

The XMC 1200 Spline is the ultimate all mountain wheel. A carbon layup specifically tuned for all mountain use makes the rim tough yet super-light. The hubs feature the latest incarnation of DT's Ratchet System. Extremely refined machining and fully lasered graphics make them the lightest hubs DT Swiss has ever made. Together with bladed top-end spokes and perfect DT Swiss build quality, this wheel is made to ride trails with speed and confidence. - Requirement-specific carbon rims are designed for the ultimate all-mountain riding experience - The carbon rim combined with the DT Aerolite and DT Aero Comp spokes ensure perfect wheel stiffness - The low weight of the 1200 Spline reduces the moment of inertia and increases acceleration, leading to higher average speeds compared with aluminum wheels with the same energy input - 180 straightpull hub is a lighter, stiffer, and more durable hub - Alloy presta valve is lightweight - Wheels are tubeless ready, with a rim design that ensures a precise and safe fit of the tire even when ridden hard - Nipples have DT Pro Lock to prevent the spoke-nipple connection from loosening - 3 cross spoke pattern, DT AeroComp straight pull spokes, DT ProLock Squorx ProHead aluminum spoke nipples

The HXC 1501 SPLINE ONE LS are extra lightweight carbon eMTB wheels are engineered for riders looking for outstanding agility. Thanks to the low weight carbon rims, riders benefit from increased agility and dynamism when going uphill and downhill, while withstanding the increased torques of eMTBs. The spokes were designed with specific diameters to align light weight and resistance. Inside the 240 hub, oversized bearings support the additional loads of eMTBs. Each component has been designed with the specific aim of delivering advanced agility to find flow and fun on the trails. - Built to provide ultimate riding agility for light eMTBs - Perfect balance between low weight and resistance, ready to go faster in the ups and the downs - Hybrid-specific spoke design provides an advanced riding experience, combining resistance and lightweight - The 240 Hybrid LS hub features larger bearings for improved durability and rolling efficiency - Ratchet EXP OS, optimized for the requirements of an eMTB, with a bigger threaded ring for direct acceleration through a torque-resistant freehub system

A carbon structure optimized for impact resistance, a reinforced flange and the ideal resin-carbon fiber ratio make the EXC 1200 Spline the benchmark in the Enduro sector. The rim's inherent strength allows the use of extremely lightweight Aerocomp and Aerolite spokes and generates optimum wheel stiffness. The heart of this wheel is a 180 Straight Pull hub with smooth-running SINC Ceramic bearings and the newest Ratchet EXP freehub system. - EXP ratchet system for a lighter, stiffer, and more durable hub - 3 cross spoke pattern, DT ProLock Squorx ProHead aluminum spoke nipples - Requirement-specific carbon rims are designed for the ultimate enduro riding experience - The carbon rim combined with the DT Aerolite and DT Aero Comp spokes ensure perfect wheel stiffness - The low weight of the 1200 Spline reduces the moment of inertia and increases acceleration, leading to higher average speeds compared with aluminum wheels with the same energy input - SINC ceramic hub bearings are engineered with optimum bearing clearance for minimum friction - Alloy presta valve is lightweight - Wheels are tubeless ready, with a rim design that ensures a precise and safe fit of the tire even when ridden hard

Your entire focus lies on the right line choice, the exact braking point and the spot-on steering movement. All the everyday stress fades away, you feel free and only hear the precise sound of the freehub system. The E 1900 Spline wheels were developed precisely for these freewheeling moments. A proven aluminum rim and hand-laced steel spokes provide the reliability required from an Enduro wheel. - Intended use = All-Mountain/Trail, Enduro and Freeride - Tubeless ready, 30mm wide and light rim - Straight-pull hubs/spokes built with a 3-cross pattern - Includes Tubeless Valve and Tape

The XMC 1501 SPLINE ONE was designed for all kinds of mountain adventures. A 30 mm tubeless optimized carbon rim easily supports wider tires, while the double butted competition race spokes and 240 hub completes this durable and versatile wheel. - Designed for All Mountain applications - Carbon rim with 30mm internal width - 240 hub - Competition race spokes and Squorx nipples

- Asymmetric Bead Socket Technology brings Stan's legendary easy inflation and the most reliable airtight seal to wider, offset carbon rims - Custom carbon layup equalizes impact forces on both the long and short sides of the rim, making both stronger - Asymmetric rim shape with offset drilling improves bracing angle and balances spoke tension to create a stronger overall wheel - M-pulse hubs - 250lb Recommended Maximum Rider Weight

Your entire focus lies on the right line choice, the exact braking point and the spot-on steering movement. All the everyday stress fades away, you feel free and only hear the precise sound of the freehub system. The E 1900 Spline wheels were developed precisely for these freewheeling moments. A proven aluminum rim and hand-laced steel spokes provide the reliability required from an Enduro wheel. - Intended use = All-Mountain/Trail, Enduro and Freeride - Tubeless ready, 30mm wide and light rim - Straight-pull hubs/spokes built with a 3-cross pattern - Includes Tubeless Valve and Tape, 6-bolt adapter with lockring

Enter the Cross-Country world with the X 1900 Spline wheels. The 25 mm wide aluminum rim offers modern tires the support needed to ride low air pressure in order to minimize rolling resistance. Meticulous wheel building by hand ensures the highest quality and reliability, allowing riders to just focus on the moment - whether it is beating the sweat out of their opponents or beating their own KOM or QOM.

After a long climb, the perfect trail lies ahead of your tires: flowy, dusty, varied, endless. Nothing holds you back from entering the All-Mountain thrills with the M 1900 Spline wheels. A rim developed with optimal balance of durability and weight offers efficient climbing characteristics as well as dent resistance on single trails. With experienced wheel building by hand, this wheel is a reliable partner to collect freewheeling moments in the mountains. - Intended use = XC and All-Mountain/Trail - Tubeless ready, 30mm wide and light rim - Straight-pull hubs/spokes built with a 3-cross pattern - Includes Tubeless Valve and Tape, 6-bolt adapter with lockring

- Asymmetric rim design allows for a stronger wheel while offering the easy inflation and Stan's trademark unmatched airtight seal. - 25mm width optimized for 40mm Gravel tires and up to 2.3" mountain tires - Light and durable 6069 aluminum with welded joint and reinforced spoke bed

- Light enough to take XC racing but was born from research and testing on the Enduro World Series circuit, making it a great rim for anyone looking to improve both descending and climbing - Asymmetric rim design allows for a stronger wheel while offering the easy inflation and Stan's trademark unmatched airtight seal. - 28mm internal width ideal for 2.2-2.5" tires - Light and durable 6069 aluminum with welded joint and reinforced spoke bed

Proterra Tough i30 wheels keep the trail in check while everything else blurs by in the periphery. Reinforced by our proven Dual I-Beam support, Proterra Tough rims feature a 30mm internal width to provide higher tire volume while also increasing sidewall support at lower pressures. High-quality EZO sealed bearings are designed to endure through seasons of aggressive riding, while a responsive 6-pawl freehub provides the snappy 3.7 degrees of engagement you demand when cranking out of corners. Choose Proterra Tough when you need a wheel that won't let you down. - 30mm inner rim width with 32 spokes laced in a 3-cross pattern - 6069 aluminum alloy rim is TCS 2.0 tubeless-ready - Sapim Secure Lock 14-gauge brass nipples provide bomber durability, while double butted 2.0/1.8/2.0mm J-bend spokes make replacement a breeze. - Tubeless tape, Solid Strip, and black alloy valves are preinstalled, making the wheels ready for tubeless tires the moment they arrive on your doorstep. The TCS 2.0 Solid Strip is a durable strip that lies beneath the tape, prevents it from sagging at the spoke holes, makes it easier to mount a tire, and protects from puncture in the case of a broken spoke. - 6-bolt rotor mounts - Top-tier EZO sealed bearings

Our best value in Quick-release disc wheels.

Race Face's first carbon wheelset comes to market during Peak Enduro, meaning people are hitting the trails as hard as they can at all angles. Striking the balance between shred-ready and climb-crushing, Race Face incorporated a generous 31mm internal width for a trail-stomping footprint, a durable carbon layout built for enduro style abuse, and an offset spoke hole layout delivering improved tension balance to up the sturdiness. With the Vault Hub’s super fast engagement, long bearing life, and spoke flanges designed for maximizing lateral stability, you can take your rally to the next level. Get ready to be fast in every direction. 2 Year No Fault Guarantee HUB - Large oversize flange for improved bracing angle - Larger bearings - No bearing adjuster needed - Wider bearing stance 6 double tooth pawls (3 engage at a time) - 120 points of engagement (3 degrees) - Independently sprung pawls - Balanced spoke counter bore - Tool-free interchangeable end caps (sold separately) RIM - Full carbon fiber construction - 31mm Internal width tubeless ready rim - 4.5mm Offset – Improves spoke balance and wheel stiffness - High gloss black water transfer logos

The XMC 1501 SPLINE ONE was designed for all kinds of mountain adventures. A 30 mm tubeless optimized carbon rim easily supports wider tires, while the double butted competition race spokes and 240 hub with Ratchet EXP completes this durable and versatile wheel. - Designed for All Mountain applications - Carbon rim with 30mm internal width - 240 hub with Ratchet EXP driver - Competition race spokes and Squorx nipples

When motor assistance and leg power meet, the range of terrain a bike can conquer grows almost exponentially. The H 1900 SPLINE is designed for this, now upgraded with the famous DT Swiss Ratchet technology. The Ratchet LN system distributes the combined forces from the rider and the motor over a larger area than the previous pawl freehub systems, increasing the systems’ durability thanks to lower load peaks. The 370 hub enables full power transmission to the ground with reinforced hybrid spokes laced to a resistant aluminum rim, available in two inner widths. - Aluminum rim, Hooked / Crotchet tubeless ready - DT Hybrid 1 spokes are reinforced and increase the lateral and torsional stiffness of the wheel - 370 Hub - Includes Tubeless Valve and Tape, 6-bolt adapter with lockring

What It Is A purpose-built XC wheelset without limitations. Light enough to race, strong enough to ride daily. Reduced fatigue and a more compliant ride through shape, laminate, and spoke-hole optimization. Who It's For Modern XC racers and riders who demand equal uphill and downhill performance, light weight, durability, and vertical compliance for long hours in the saddle. Why We Made It Carbon fiber is responsible for unlocking the potential of bigger and wider tires on mountain bikes. Today, riders can improve comfort, efficiency, and control by adapting their mountain bikes perfectly for the terrain and trails. Undoubtedly, this means they can go further and faster with more confidence. Complement increased tire volumes and rim widths with a modern XC tread, and you've got an effective system, maximized for the variable-pitch trail. The result is a purpose-built full-carbon fiber XC wheelset that is lighter, wider, and more vertically compliant without sacrificing strength or reliability. Additionally, the M525 features ENVE's patent pending, wide hookless beads that improve pinch flat resistance and allow riders to run modern lightweight XC tires with a reduced risk of pinch flatting or impact damage.

Snappy acceleration is what you can expect from this aluminum wheel developed to meet all cross country needs. If, to you, cross country means high-speed, after-work rides, and the occasional endurance race, then you should have a closer look at the XR 1700 SPLINE wheels. With a light and welded cross country aluminum rims, reliable 36T RATCHET SL hubs, and Swiss precision finish, all the way from the competition spokes to the signature DT Swiss wheel build quality, it's a wheelset that is up to competing, day-in, day-out, against yourself, against your buddies, or in an all-out race.

The low-profile, radially compliant alloy rim injected with SPANK's award-winning Vibrocore to add torsional strength and lateral stiffness offers a smooth and highly responsive ride feel. Hand-built to A-Class specifications, the 350 Vibrocore wheels with SPANK Hex Drive hub is the premium offer from the SPANK wheelhouse and is trusted by pros on the UCI DH World Cup and Enduro World Series circuit. - Unique profile with low sectional height & wide width adds radial compliance & lateral stiffness - Improved radial compliance for better traction over bumps & chatter while reducing negative feedback to the rider gives enhanced performance & comfort - Vibrocore inner well reduces the transmission of harmful vibration frequencies & increases the fatigue life of the rim - 30mm internal width is versatile, fitting tires from 2" to 2.6" and allows plus-size tire use without negative squaring off of tire profiles

- A high-performance alloy rim designed for freeride, enduro, and downhill race use - Tubeless-ready with anti-burp rim hooks to prevent the loss of pressure and keep tires firmly in place - 32 holes with an inner width of 28mm and outer width of 33mm to optimize tire spread and enhance traction - The corrugated rim center adds exceptional strength, making it more rigid and allowing the rim to be wider without adding material - Shot-peened finish to increase fatigue life and make it more durable

ENVE AM30 Carbon Wheelsets use a 30mm inside width rim that is tuned for compliance and damping for performance on All-Mountain, Enduro, and Trail riders. - 30mm internal rim width - Gravity rated impact strength - Rim shape tuned for compliance and damping - Wide Hookless Bead Anti-pinch flat technology

What It Is The definitive mountain wheel. The M6 Series defines the modern and varied interpretation of the mountain bike. Loaded with traction and acceleration on the climb, it's also backed with precision and control while absorbing vibrations and impacts on the descent. The M6 Series is designed in two diameters and three widths to ensure your sophisticated preference for tire size and pressure is met with an uncompromising tire-to-rim interface. Who It's For The mountain biker who wonders what is possible, the skeptic afraid of "plastic" wheels, the weight weenie, the Clydesdale, the high-mileage guy, the weekend warrior. It would be easier to describe who it is not for… Why We Made It ENVE showed the world that a mountain bike wheel could be carbon — we're still immensely proud of that achievement. A mountain bike wheel, however, can be so much more. The M6 Series is not about technical challenges, and we refuse to chase specifications in order to be the widest, tallest, or stiffest. For the M6 Series of wheels, the question was not about carbon, rather, "What is the potential of a mountain bike wheel?" Each M6 Series wheel model is designed for the broad range of tire widths, hub configurations, and sizes so that you, the modern trail rider, can choose between them.

- Lighter, wider, stronger and more flat resistant - Ride Tuned – Smoother ride improves tracking, control, and reduces fatigue - Wide hookless bead dissipates impact energy and prevents pinch flats. - 30% increase in impact toughness, 60% more flat resistant - Optimized for 2.3-2.5" tires

After a long climb, the perfect trail lies ahead of your tires: flowy, dusty, varied, endless. Nothing holds you back from entering the All-Mountain thrills with the M 1900 Spline wheels. A rim developed with optimal balance of durability and weight offers efficient climbing characteristics as well as dent resistance on single trails. With experienced wheel building by hand, this wheel is a reliable partner to collect freewheeling moments in the mountains. - Intended use = XC and All-Mountain/Trail - Tubeless ready, 30mm wide and light rim - Straight-pull hubs/spokes built with a 3-cross pattern - Includes Tubeless Valve and Tape, 6-bolt adapter with lockring

The 350/XM421 front wheel features a DT350 straight pull, front boost Center-Lock disc hub, built with Champion spokes to a 28 hole 29" DT XM421 rim.

On an eMTB you run into trail sections much faster than you have ever before considered possible. The H 1700 SPLINE 30 has the power to get you out of such situations as a winner and not face down in the dirt. Steering precision is covered by the strong spokes and the trademark DT Swiss wheel build with high and even spoke tension. The rim can take tires suited for fast riding on rugged terrain and supports them perfectly, even at low pressures. Reliable Ratchet System hubs finally make sure that you can come back and attack those gnarly sections of trail time and time again. - 350 based Spline hub with 24 tooth ratchet system and steel freehub body - E-bike specific straight pull spokes are built with a 3-cross pattern - Includes SRAM XD driver/end cap, tubeless tape and tubeless valve

The new standard in modern day, high performance XC and All Mountain wheelsets. With its hookless full carbon and tubeless ready rim, the XRC 1200 strikes a perfect balance between lightweight and aggressive riding-readiness. Its intricately machined hubshell is superlight while the 25mm tall rim has the inherent stiffness necessary for efficient riding and to precisely hold a line. Together with the renowned DT Swiss build quality, this wheel really sets the benchmark for going fast up and down, whether it's between the tape or not. - Tubeless ready wide and light carbon rim - 180 EXP hub with straight-pull DT spokes, 3-cross pattern - Factory installed tubeless-ready tape - Includes tubeless valve, 6-bolt rotor adapter, tools and wheel bag

EXC 1501 SPLINE ONE combines everything a modern enduro rider wants in a wheel. The 30 mm wide carbon rim gives you the precision to stay on track even on the trickiest lines while a 240 hub keeps it spinning. Both components are held together by performance weight optimized competition race straightpull spokes. - Designed for Enduro applications - Carbon rim with 30mm internal width - 240 hub - Competition race spokes and Squorx nipples

The HXC 1501 SPLINE ONE LS are extra lightweight carbon eMTB wheels are engineered for riders looking for outstanding agility. Thanks to the low weight carbon rims, riders benefit from increased agility and dynamism when going uphill and downhill, while withstanding the increased torques of eMTBs. The spokes were designed with specific diameters to align light weight and resistance. Inside the 240 hub, oversized bearings support the additional loads of eMTBs. Each component has been designed with the specific aim of delivering advanced agility to find flow and fun on the trails. - Built to provide ultimate riding agility for light eMTBs - Perfect balance between low weight and resistance, ready to go faster in the ups and the downs - Hybrid-specific spoke design provides an advanced riding experience, combining resistance and lightweight - The 240 Hybrid LS hub features larger bearings for improved durability and rolling efficiency