Parts & Accessories

Cat Eye Mounts & Brackets can be added to multiple bikes, allowing any bike to be quickly adapted for nighttime rides. - Center-mount bracket uses the fender mount location at the fork crown - Keeps handlebars clear of clutter and lowers light to provide better contrast for the road surface - Compatible with AMPP1100 / 800, VOLT1700 / 1600 / 1200 / 800 / 700 / 400 / 300 / 200 / 100, Nano Shot+, Nano Shot, Econom Force, Econom, Uno, Jido, and HL-EL135

Flexible Versatite™ mount for Dash, Zot, Dart, Hotrod, Hotshot Micro 2W, Hotshot Pro 200 (flexible mount version; not for Hotshot Pro 200C) systems. Compatible with most handlebars, seat posts, and seat stays including aero styles.

Mount your Cygolite bicycle headlight to a variety of GoPro compatible interfaces and third-party mounting options that are compatible with the GoPro interface. - Compatible with Ranger, Expilion, Metro, and Streak series - Includes adapter piece only

- Installs under the seat for a low profile, less cluttered appearance - Easy to install and stays secure in all terrain - Clamps to most two-rail bicycle saddles - Use with Cygolite Hypershot and Hotshot tail lights - Can also be used with GoPro compatible interface - Premium plastic for strong durability - Only weighs 23 grams - Less prone to scratching bikes compared to metal mounts - Tail light secures to mount without removing from saddle rails - Designed, engineered, and assembled in the USA

Helmet mount kit compatible with Ranger, Expilion, Metro Pro and Plus, Metro, Streak, and Pace systems. - Includes: helmet bracket, velcro strap, and foam pad.

2nd generation Locktite™ tool-free handlebar bracket mount for Ranger, Expilion, Metro Pro and Plus, Metro, Streak and Pace systems. Compatible with 22 to 32mm diameter handlebars.

- Fits 25.4 to 35mm handlebars. - Wide range compatibility designed for standard and larger diameter handlebars. - Easy to install and stays secure in rough terrain. - Compatible lights: Ranger Endurance, Ranger, Metro Pro, Metro Plus, Metro, Streak - Durable and convenient. - Premium plastic for strong durability. - Quick release feature makes removing the light quick and easy. - Designed, engineered, and assembled in the USA to ensure top-quality mounts for your light.

The Recon TL Rack mount securely attaches your Recon tail light to your rear rack. - Bracket securely attaches Recon TL 200 / 100 to a rear rack - Compatible with Recon TL 200 and Recon TL 100 only

A unique, innovative clamp system that clips securely and discreetly to your seat rails. Compatible with Recon TL 200 and Recon TL 100 only. Light not included

An easy to attach mount that allows you to clip your Recon TL to any compatible Giant helmet.

A versatile, adjustable mount be used with a Giant helmet featuring a GoPro compatible mount surface. Mount your light, and easily switch between Recon headlights and your GoPro camera. Compatible with Recon HL 200 and Recon HL 100 only. - Compatible with Recon HL 200 and Recon HL 100 only

A universal mount that fits standard 22-35mm handlebars and aero-shaped handlebars. An easy on/off rubber strap mount allows quickly switching Recon lights from bike to bike. - Fits all Recon HL series lights* - Not compatible with Recon HL 200 and Recon HL 100

Keeping the light stable and centered on the handlebar, the stem mount allows for a clean, uncluttered handlebar.

A universal quick release mount that attaches to round-shaped drop and flat handlebars.

Recon-E Light to Bosch motor unit connector cable.

Perfect for E-city and E-trekking bikes, the fork mount puts the light directly on the fork crown above the mudguard, allowing space for a bag or shopping basket on the front of the handlebar.

Recon+ tail lights feature an integrated rearview radar that pairs with ANT+ and Bluetooth capable devices to alert you to traffic approaching from behind. The Recon+ tail light can also switch to a lower intensity light that avoids blinding fellow riders on the group ride. - 2.4GHz wireless remote control for Recon+ headlights - Two-button thumb control for power, light mode and device pairing - USB-C charging port - Rated IPX6 waterproof

Spare mount for the TL300 Radar tailight

Recon-E Light to Shimano motor unit connector cable.

Lezyne's Go-Pro LED Adapter allows you to mount your Lezyne LED light to any standard Go-Pro mount. This makes it fast and easy to switch swap out your camera and headlight using the same mount.

Lezyne's Composite Bar Mount is a hard mount made of a reinforced Composite Matrix cradle for a strong and secure attachment of the Mega Drive, Deca Drive, and XL LED lights to the handlebar. It is designed for 25.4 mm or 31.8 mm bars, with the cradle designed to pivot 15 degrees laterally to allow adjustment of the LED light beam angle and directing it where it is most needed. A large thumb screw secures the CM mount to the bar without need of tools, and can be tightened by hand or a 1mm hex key. Molded rubber shims add grip and fine-tune fitting to undersized bars. Composite Bar Mounts are sold in a kit with the Mega Drive, Deca Drive, or XL LED lights.

- Versatile LED and accessories forward mount - Bolts directly to stem faceplate - Included Aluminum Fork Mount, spacer and screw set - Suitable for most Lezyne most E-Bike front lights (Macro, Power, Power Pro, Micro, Hecto)

Lezyne replacement mounts for ebike lights.

- A quick-release LED mount with GoPro compatibility - Super quick mounting and dismounting of compatible Lezyne LEDs - CNC-machined aluminum construction - Ultra-secure locking mechanism for maximum beam pattern stability - Compact design ensures a clean integrated cockpit - LED qPro Mount compatibility: Mega Mount Small & Large, Flexi Stem Mount, Garmin/Wahoo GPS Forward Mount with GoPro - Maintains IPX7 water-resistance rating - Color: Black The Lezyne LED qPRO Mount is a CNC-machined aluminum, quick-release mount with GoPro compatibility designed for super quick mounting and dismounting of compatible Lezyne LEDs. The secure locking mechanism locks LEDs in place providing maximum beam-pattern stability. A compact design ensures a clean integrated cockpit when combined with the Lezyne Mega Mount S/L, Flexi Mount, or Garmin/Wahoo GPS Forward Mount with GoPro compatibility. The mount maintains an IPX7 water-resistance rating when installed to compatible Lezyne LEDs for optimal functionality in the toughest weather conditions. LED Light Compatibility: All Lezyne lights except for KTV, Zecto, and Femto series lights Limited StVZO LED Light Compatibility: Above handlebar - Standard StVZO models Below handlebar - Reverse StVZO models This product is not affiliated with, endorsed by, or in any way associated with GoPro Inc. or its products and services. GoPro, HERO, Session, Karma, and their respective logos are trademarks or registered trademarks of GoPro, Inc.

Light & Motion's Vis 180 Aero Post Pad lets you easily attach your Vis 180 taillight to the back of your aero seatpost so you can be fast and visible.

Convert your Light & Motion Vis 360 (sold separately) into a head mount and use it wherever your non-helmet adventures may lead you. Excels as a running companion and great for bicycle touring as it transforms your Vis 360 into a camping headlamp.

The best taillight mounting solution available! Mount your Tuck e-Bike taillight on the seat rails, effectively placing the rear light on the highest (and most visible) part of the bike. Easily attaches to seat rails and has ball-and-socket adjustment to perfectly angle the rear light. - Compatible with Tuck e-Bike taillight

Seamlessly mount your Nip e-Bike light to the underside of the Bosch computer module. - Compatible with Nip e-Bike Headlights

Mounting bracket for MSW front White Bat Headlight. - Includes 1 front mounting bracket

Replacement bracket for Pico and Tigermoth lights. - Includes 1 front bracket, 1 rear bracket, and 2 mounting straps